CSPLD
Wired data transfer preset torque wrench
Tightening Torque Data Management
Preset
Interchangeable Head
Judgement
Light indicator/buzzer
Tightening torque data captured when the wrench clicks at the set torque is transferred by cable. The Pass/Fail judgment is displayed on the body’s LED display for handy confirmation.
QH15D interchangeable head (sold separately) shown on the CSPLD100N3×15D model
When tightening torque pass/fail decision is OK.
When tightening torque Pass/Fail judgment is NG (No Good)
Configuration example: Tightening data management system using CSPLD torque wrench
Application
-
Tightening torque data management
-
Collects tightening torque data in work environments where an FD/FDD type of wireless torque wrench cannot be used.
Features
-
CSPLD wired data transfer preset torque wrenches display tightening torque Pass/Fail judgments on the body’s LED display for easy, close-at-hand confirmation.
-
The LED lamp indicates the tool to be used, letting the worker select the appropriate tool without hesitation. (* Separate management software is required to display this. Contact Tohnichi for more information.)
-
Considerably more compact: Transmitter case size is only about 60% that on the older CSPD series.
-
The curly design of the cord from the transmitter case improves workability, and places less load on the fixed end of the cord to inhibit fraying.
Demonstration video
CSPLD Wired Data Transfer Preset Torque Wrench
Specifications
|
MODEL |
CSPLD25N3-10NX10D |
CSPLD25N3X10D |
CSPLD50N3X12D |
CSPLD50N3X15D |
CSPLD100N3X15D |
CSPLD140N3X15D |
CSPLD200N3X19D |
CSPLD280N3X22D |
S.I. TORQUE RANGE
[N･m] |
MIN.～MAX. |
2～10 |
5～25 |
10～50 |
20～100 |
30～140 |
40～200 |
40～280 |
|
MAX. HAND FORCE P [N] |
53.8 |
134.4 |
240.4 |
229.4 |
343.6 |
400.6 |
449.4 |
424.2 |
DIMENSIONS
[mm] |
OVERALL LENGTH |
L |
186 |
208 |
218 |
291 |
349.5 |
445 |
660 |
|
EFFECTIVE LENGTH |
L’ |
193 |
214 |
217 |
290 |
349 |
429 |
627 |
|
HEAD |
Φd3 |
10 |
12 |
15 |
19 |
22 |
|
BODY |
m |
19 |
25.5 |
28 |
35 |
|
n |
9.2 |
11.2 |
12.2 |
15 |
|
m1 |
23 |
29.5 |
33 |
40 |
|
n1 |
13.2 |
15.2 |
17.2 |
20 |
|
Φd |
15 |
20 |
21.7 |
27.2 |
|
ΦD |
29 |
34 |
27 |
|
WEIGHT [kg] |
0.42 |
0.56 |
0.75 |
0.87 |
1.3 |
1.75 |
|
|
|
|
|
|
|
|
|
|
|
Accuracy ±3% |
Notes
-
If you purchase the CD5 compact display at the same time, specify the set torque value and Tohnichi will send a calibration certificate with your order.
-
The new CD5 version is the 1.4, launched in January 2018. When connected to a CSPLD torque wrench, its LED lamps show Pass/Fail judgments.
-
For the CD5 version 1.3 and earlier, an AC adaptor (sold separately) is required for LED lamp Pass/Fail indications when connected to a CSPLD torque wrench. Contact Tohnichi for more information.
Standard accessory
Connector cable length: 3m
Dimensions
CSPLD dimension diagram