Cần siết lực Tonichi QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH series

Mã sản phẩm: QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH

Tình trạng:

Cần siết lực Tonichi QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH series

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH

Rotary Slip-type Preset Pokayoke (Error-proofing) Torque Wrench

Prevents human tightening errors (Pokayoke)

Preset

Ratchet Head

Rotary Slip

A torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors.

QSPCAMS6N

QSPCAMS12N

QSPCALS30N

QSPCALS70N

QSPCAFHP12N

QSPCAFH30N

QSPCAFH70N

Example of a Pokayoke (error-proofing) configuration:

Application

Prevents under-tightening, over-tightening, and other human tightening errors.

Features

A torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors.
QSPCAMS and QSPCALS are rotary slip-type torque wrenches with wired limit switch. When set toque is reached, rotary slip occurs with simultaneous output of a contact signal from the limit switch.
QSPCAMS and QSPCALS have a highly durable curly cord.
A limit switch can be connected to a CNA-4mk3 count checker (sold separately) to easily create a tightening count management system.
Signals from the limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls.
With the QSPCAFHP and QSPCAFH, when set torque is reached, rotary slip occurs and a tightened-to-completion radio signal is transmitted. The system is cordless, greatly increasing workability.
QSPCAFHP and QSPCAFH torque wrenches can be used with the R-FH256 receiver (which is sold separately). With a connection to the I/O-FH256 multi-box (sold separately), a single receiver can recognize the IDs of up to four torque wrenches. Connect the I/O-FH256 and the CNA-4mk3 Count Checker to easily establish a Pokayoke (error-proofing) system.
The QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH conform to the IEC 61340-5-1:2007 Standard (protection of electronic devices from electrostatic phenomena).
The QSPCAFHP conforms to telecommunication standards in Japan, the U.S., Canada, the EU, China, Thailand, Malaysia, Indonesia, Taiwan, Mexico, Vietnam and South Korea (information valid as of March 2019). The QSPCAFH conforms to telecommunication standards in Japan, the U.S., Canada, the EU, China, Malaysia, Indonesia, India, Thailand, South Africa, South Korea, Russia, Taiwan, Mexico, Vietnam and Singapore. For other countries and regions, please contact Tohnichi.

Specifications

MODEL			QSPCAMS6N	QSPCAMS12N	QSPCALS30N	QSPCALS70N	QSPCAFHP6N	QSPCAFHP12N	QSPCAFH30N	QSPCAFH70N
S.I. TORQUE RANGE［N・m］	MIN.～MAX.		2～6	4～12	10～30	20～70	2～6	4～12	10～30	20～70
METRIC TORQUE RANGE［kgf・cm］	MIN.～MAX.		20～60	40～120	100～300	200～700	20～60	40～120	100～300	200～700
AMERICAN TORQUE RANGE［lbf・in］	MIN.～MAX.		20～50	40～100	90～270	180～620	20～50	40～100	90～270	180～620
DIMENSION[mm]	OVERALL LENGTH	L	197		267	346	197		267	346
	SQ. DRIVE	a	6.35		9.53		6.35		9.53
	HEAD	R	14		17	21.5	14		17	21.5
	HEIGHT	h	37		48	58	37		48	58
	BODY	e	34		40.5	49	34		40.5	49
		W	42		51	57.5	44.3		51	57.5
		φd	15		20	27.2	15		20	27.2
		φD	29		34	-	24		34	-
WEIGHT[kg]			0.33		0.64	1.24	0.33		0.64	1.24
ACCURACY[％ ]			±6	±4			±6	±4


MODEL	Torque Wrench			Receiver
MODEL	QSPCAFH		QSPCAFHP	R-FH256
FREQUENCY BAND	2.4GHzband (2.402GHz～2.479GHz、1MHz interval 78ch)
COMMUNICATION SYSTEM	Spread spectrum(frequency hopping system)
MODULATION SYSTEM	GFSK
MODULATION RATE	1Mbps
GROUP CHANNEL	256(000～255)
ID	３digit (000～999)、7digit (alphanumeric）
INPUT/OUTPUT	－			no voltage contact output(1a) RS232C output


POWER　[V]	DC1.5V(AAA alkaline battery)		DC3V(CR2032)	AC100V～240V
ANTENNA	chip antenna		pattern antenna	dipole antenna
OPERATING TEMPERATURE RANGE [℃]	0～45
TRANSMITTING RECEIVING DISTANCE [m]	about 10～20