DLT-N-UC
model: DLT-N50-UC, DLT-N100-UC, DLT-N200-UC
Digital torque wrench
Digital control for ease of use and handling. Precise contol of torque at a low cost.
●Data memory function : Conned the torque wrench after use to your PC, and the measurement data is stored in the PC for editing in the Excel format (Windows Excel only).
●Powered by 2 rechargeable nickel-metal hydride (Ni-MH) batteries, which are recharged via the USB port of the torque wrench while they are in the wrench.
●Auto power-off: Saves power to enable use of the unit for a longer time.
●Calendar function : Date and time of tightening operations are stored in the memory.
●Smart and slim design based on a new concept.
●The head is easily replaceable to suit different purposes of use.
●±2% + 1 digit guaranteed accuracy (±3% + 1 digit for DLT-N50-UC).
|
Data memory |
999 data |
|
Measurement mode |
RUN ： Current load value is shown continuously
PA ： The first peak value is detected and held
PC ： Peak to peak and auto start |
|
Alarm mode |
LED and buzzer |
|
Measurement |
method CW/CCW auto switching |
|
Power source |
Ni-MH rechargeable batteries, size AA, 1.2V; 2 pieces |
|
Use time |
Approx. 20 hours fully charged batteries (continuous use) |
|
Charge time |
Max 5 hours (appopx.) for dischanrge and charge |
|
Auto power off |
After 60 seconds |
|
I/O terminal |
USB terminal (for Windows) for data outputting and battery charging |
|
Operating temperature range |
+5～+35℃ |