SpecificationsModelD-10ND-20NRange10mm20mmResolution0.005mm / 0.01mmAccuracy (excluding
quantized error)0.01mm0.01mmMeasuring forceLess than 1.0NLess than 1.2NCable length2mMounting methodø 8mm stem or 6.5mm hole on lug backContact pointM2.5 × 0.45 Sø 2.4mm cooper (X-2)Output Signal90º phase difference, 20µm pitch
(R03-PB8M Tajimi connector)
Rectangular wave (Low=0V High=8V)Features* Recommended for locations where cable extension (10 to 50 meters) is necessary.
* Recommended for use in electrically noisy environments.Options* Extension cable (2, 3, 5 and 10meters are standard length, other lengths are made to order.)
* If a longer cable is required for the linear gauge itself, we can also supply it as a special order.Wiring precaution* Signal Lines should be wired through a separate duct from other electrical lines.