Đồng hồ đo Peacock S-5, S-7, S-9, SC-2A

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Đồng hồ đo Peacock S-5, S-7, S-9, SC-2A

Mã sản phẩm: S-5, S-7, S-9, SC-2A

Tình trạng:

Đồng hồ đo Peacock S-5, S-7, S-9, SC-2A

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

MODEL: Peacock S-5, Peacock S-7, Peacock S-9, Peacock SC-2A

Specifications

Model

S-5

S-7

S-9

SC-2A

Spindle Movable
Range

3mm

4mm

10mm

Graduation

0.001mm

0.01mm

0.05mm

※1

Tolerance Setting
Range

0.1 ( ±0.05 ) mm

1.0 ( ±0.5 ) mm

3.0 ( ±1.5 ) mm

3.0mm

Accuracy

±0.002mm

±0.005mm

±0.025mm

±0.005mm

Measuring Force

Less than 1.2N ( 120gf )

Contact capacity

MAX DC24V 20mA

Number of
judgement Stages

Three stages of -NG, OK and +NG

Cord length

2 m

Stem diameter

ø8 mm

Operating
temperature range

0 - 60 ℃

Options

Code Length 5m 10m / Back cover with Lug (GB-1A)

Dial gauge for setting

Dial indicator
for setting

-----

Model 107F, 5F

Weight

180 g

150 g

Cable signal table

S-5, S-7, S-9
	(1)	COM	[ blue ] black	-NG with (1) and (2) at ON
	(2)	-NG	[ red ]	+NG with (1) and (3) at ON
	(3)	+NG	[ white ]	OK with (1), (2),and (3) at OFF

SC-2A
	(1)	COM	[ blue ] black	-NG with (1), (2),and (3) at OFF
	(2)	OK	[ red ]	OK with (1) and (2) at ON
	(3)	+NG	[ white ]	+NG with (1), (2),and (3) at ON

Caution

	When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier.
	In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ).
	In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle.
	In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap.

Signal Gauge S-5, S-7, S-9, SC-2A

With its high resolution of 0.001mm
scale, it is most suitable for
judgement of the values measured
on finished parts with high accuracy.

Model	S-5
Graduation	0.001mm
Measurement range	0.1 ( ±0.05 ) mm

With its resolution of 0.01mm scale,
it is generally used. Its pointer is in
an anti-shock structure so as to
give stable discriminating signals.

Model	S-7
Graduation	0.01mm
Measurement range	1.0 ( ±0.5 ) mm

With its most gross scale of 0.05 mm,
it is applicable to select grossly
worked parts and as cast parts at the
low-est costs.

Model	S-9
Graduation	0.05mm
Measurement range	3.0 ( ±1.5 ) mm

Once its tolerance is set, a dial gauge
is dismounted before using it so that
its endurance is really improved.
With its large tolerance setting range
of 3mm, it is most suitable for
judgement of the measured values in
a wide tolerance range.