Condition monitor CM-1001 is used for minimizing damage of rotating machinery by continuously monitoring health condition of the rotating machinery. For instance, detecting broken cutting tool of machine tool, diagnosis of pump-motor trouble are effective.
CM-1001 including data logger function. Then it can record machine condition in microSD form just before the trouble. This function will be very useful to prevent recurrence.
Features of CM-1001
-
Over-all vibration monitoring
-
Number of Monitoring channel is 1.
-
Acc-peak, Acc-rms, Acc-CF, Vel-rms, Disp-EQV are measured and monitored simultaneously. Alarm and Trip setting value are confirmed easily when monitoring.
-
Alarm level and Trip level can set independently. Each level is set at 5% to 99.9% of full scale in 0.1% step.
-
Alarm and Trip comparing delay time can be set from 0 to 9.9 seconds in 0.1 second step.
-
Alarm and Trip resetting time can be set from 0 to 99.9 seconds in 0.1 second step.
-
Data logging function with microSD card up to 32 GB.
-
Data transfer to PC via USB port.
-
LCD Screen image storage function
-
5 external inputs are equipped as standard for monitoring start, external resetting etc.
-
5 external outputs are equipped as standard not only for alarm, trip but also sensor disconnection alarm etc.
Specifications
|
Model |
CM-1001 |
|
Measuring range |
|
Number of input channel |
1 |
|
Applicable vibration sensor |
Piezoelectric accelerometer |
|
option: Electro-dynamic vibration sensor (max. ±5V, input impedance 100kΩ) |
|
option: Optical position detector (max. ±5V, input impedance 100kΩ) |
|
Measuring and frequency range |
Acceleration: 0.1 to 40m/s² 10Hz to 20kHz ±3dB
Velocity: 0.1 to 200mm/s 10Hz to 1kHz ±1.5dB (based on JIS B0907-1989)
Displacement: 1.0 to 5000μm 10Hz to 1kHz±1.5dB |
|
Measuring mode |
Acceleration: 0-peak, True rms, Crest Factor
Velocity: True rms
Displacement: derived peak-peak
Above data are indicated simultaneously and time graph is displayed. |
|
Analysis and Monitoring mode |
|
Over-all vibration monitoring |
Include |
|
Frequency band monitoring |
option |
|
Unbalance vibration monitoring |
option |
|
Harmonic vibration analysis |
option |
|
Time waveform observation function |
option |
|
FFT analysis |
N/A |
|
Thresholds |
|
Setting range |
5 to 99.9% of Full Scale. Each item of measuring mode. |
|
Monitor output |
|
Alarm |
Output when measured value exceed set alarm level |
|
Trip |
Output when measured value exceeded set trip level |
|
Power supply malfunction alarm |
Output when power supply lost |
|
“Under monitoring” output |
This signal is active during monitoring |
|
“Operation mode” output |
This signal indicates operation mode is “Remote” or “Local”. |
|
Output rating |
Open collector output (DC30V 50mA)
Contact rating for power loss: DC24V,1A or AC125V,0.3A |
|
External input |
|
Command of start monitor |
Active only at remote operation |
|
Reset command for alarm |
Alarm output is reset and Trip output not reset |
|
Reset command for Trip |
Trip output is reset |
|
Remote Local switching |
Switching Remote mode and Local mode |
|
Command of Power On |
Power on at remote mode |
|
Input rating |
Photo Coupler input (DC12V,10mA) |
|
Others |
|
USB Port |
Data transfer to PC, Storage LCD screen image |
|
Data storage |
Storage of measured data in microSD card.
Storage LCD screen image(32GB Max.) |
|
Display |
3.5 inch TFT color LCD |
|
Operation |
Dialog with touch screen |
|
Environment |
Temperature: 10 to 30°C (without condensation)
Humidity: 20 to 80% |
|
Power supply |
AC100 to 240V ±10% 50/60Hz |
|
Dimension |
170 (W)x 35.5 (L)x 95 (H)mm |
|
Mass |
350g |
|
Accessories |
|
Vibration sensor |
Piezoelectric Accelerometer, Model:P12SC (Sensitivity: 10pC/ (m/s²) )
Fixing magnet: KM-025C (Adsorption force 100N)
Connecting cable: LN-041 (2.5m) |
|
Rotation sensor |
SFS-M1H
Fixing magnet: DG1030 |