Máy đo độ ẩm, nhiệt độ 4 kênh Sato SK-L400T

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy đo độ ẩm, nhiệt độ 4 kênh Sato SK-L400T

Mã sản phẩm: SK-L400T

Tình trạng:

Máy đo độ ẩm, nhiệt độ 4 kênh Sato SK-L400T

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

4-ch Datalogger SK-L400T

4-channel datalogger for temperature measurement with K type themocouple probes. Possible to simultaneously display four temperatures from four different locations on the large LCD. The measured values can be logged on the SD card.
NB. Probes are separately purchased, not included in the main unit.

•Simultaneously measures temperature at four locations.
Up to four K-type thermocouple probes can be connected.
Simultaneously displays four temperatures from four locations (channels) on the large LCD for easy reading. By using the ASTM (former ANSI) miniature connector for the K-type thermocouple, various optional sensors can be connected.

•Easy visibility.
Measured data are displayed on a large display. Backlight makes it easy to read in dark places.

•Logging the measured values on the SD card
The measured values can be logged on the SD card installed in the unit.
By using the analysis software "4ch DATALOGGER for Windows" included with the unit, graph plotting and data analysis can be easily done.

• Alarm issuance at upper and lower limit temperatures
Different alarm values (upper and lower) can be set for the four channels. If the measured value goes out of the set limit value, a buzzer sounds and the LED lamp flashes to alert.

•Data analysis software provided as a standard accessory..
The acquired data can be easily evaluated with graphs by using the exclusive software.

• Display of various calculation results.
Display of the maximum (MAX) or minimum (MIN) value, relative value (REL function), temperature difference (T1 – T2 function), offset function.

•Logging interval can be selected from 14 options..
1 sec. 2 sec, 5 sec, 10 sec. 15 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min and 90 min.

• Manual logging, preset logging, memo function
Equipped with manual logging, preset logging that enables you to set the time at which to start or stop logging, and a memo function for quickly logging the current measured value. Can be used for various data collection operations..

•AC adapter is available at option..
For a long tern recording, AC adapter is useful.

•Mouting on a tripod..
The threaded hole on th back of the unit makes it easy to mount on a tripod.

Exclusive data analysis software is included with SK-L400T datalogger as a standard accessory

- Graph display on the PC screen -

•	"4ch DATALOGGER for Windows" is the exclusive data analysis software for 4-ch Datalogger Model SK-L400T

Features on the Software

The measured values can be logged on the SD card. By using the software, graph plotting and data analysis can be easily done.
The max. min. and average values can be automatically calculated in each channel.
The accumulated temperature is calculated. This is suitable to analyze the cumulated temperature level.
Using the marker line facilitates the analysis of points exceeding a certain temperature value or of the specified temperature range.
The data stored with CSV format can be evaluated by using the commercial spreadsheet software.

OS	Windows XP (SP3) Windows 7 (32 bit/64 bit) Windows 8/8.1 (32 bit/64 bit) Windows 10 (32 bit/64 bit)
CPU	Capable of properly running one of the above OSs
Memory	Capable of properly running one of the above OSs (Recommendation) Windows XP: 512MB or more Windows 7/8/8.1/10: 2GB or more
Hard disk drive	150MB or more free space
CD drive	CD drive is equipped

The minimum system requirements

* Please click here to skip to the software downloading page

Specifications

Catalog No.

No. 8191-00

Model

SK-L400T (main unit)

Display range

-202.0 to 1372°C

Accuracy (main unit)

±(0.3%rdg+1)°C at 23°C±5°C (Accuracy is different depending on the probe contected)

Temperature coefficient

±(0.01%rdg + 0.1)°C/ °C (at other than 18 to 28°C)

Resolution

0.1 °C : at -202.0 to 999.9°C
1 °C : other than above range

Sampling

approx. 1 sec.

Logging interval

1 sec. 2 sec, 5 sec, 10 sec. 15 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min and 90 min.

Power requirement

4 AA size alkaline batteries or 4 AA size nickel hydrogen chargeable batteries. Exclusive AC adapter (option)

Battery life

approx. 500 hours
In use of alkaline batteries under normal temperature at 1-min. interval (backlight/display: OFF)

Materials

ABS resin

Dimensions

approx. 158 (W) × 106 (H) × 40mm (D)

Weight

approx. 420g (including batteries)

Accessories

AA size alkaline batteries	4 pcs.
SD card (8GB)	1 pc.
CD-ROM for data analysis software	1 pc.
Instruction manual	1 pc.
Carrying case	1 pc.

Optional probes

SK-K010 Standard probe (Used for liquid, viscosity and semisolid) (Sensor: Class 1) Range: -50 to 300°C φ2.3×150mm with 0.75m cord	SK-K020 Quick response probe (Sensor: Class 1) Range: -50 to 300°C φ1.0×100mm with 0.75m cord
MC-K7100 Standard probe (Used for liquid. viscosity and semisolid) (Sensor: Class 1) Range:-100 to 300°C φ2.3×150mm with 1.5m cord	MC-K7101 General purpose probe (Sensor: Class 1) Range: -100 to 700°C φ3.2×250mm with 1.5m cord
MC-K7102 High temperature probe (Sensor: Class 1) Range: 0 to 800°C φ4.8×500mm with 1.5m cord
MC-K7103 Asphalt temperature probe (Stainless steel grip type) (Sensor: Class 2) Range: 0 to 300°C φ5.0×250mm with 1.5m heat resistance cord	MC-K7105 Duplex wire probe (Stainless steel shield wire) (Sensor: Class 2) Range: -100 to 300°C φ0.65×10m with 0.3m cord
MC-K7106 Asphalt temperature probe (Resin grip type) (Sensor: Class 2) Range: 0 to 300°C φ5.0×250mm with 1.5m cord	MC-K7500 Water temperature probe (water pressure resistance type) (Sensor: Class 2) Range: -30 to 100°C φ17.0×123mm with 10m cord
MC-K7108 Compost temperature probe (Grip: SUS304) (Sensor: Class 2) Range: 0 to 300°C φ8×900mm with 1.5m cord
MC-K7109 Asphalt temperature probe (Grip: SUS304) (Sensor: Class 2) Range: 0 to 300°C φ5×250mm with1.5m cord	MC-K7301 Surface temperature probe (Sensor: Class 2) Range: 0 to 600°C Sensing part: φ25×40mm with 1.5m cord
MC-K7304 Surface temperature probe (mount on flat surface with screws) (Sensor: Class 2) Range: 0 to 300°C thickness (t)0.6mm with 3.0m cord	MC-K7307 Surface temperature probe (Sensor: Class 2) Range: -30 to 400°C Sensing part φ17×22mm with 1.5m cord
MC-K7308 L shape type surface temperature probe (Sensor: Class 2) Range: -30 to 600°C Sensing part φ16×26mm w/ 1.5m cord
MC-K7501 Clip type probe (black) (Sensor: Class 2) Range: -20 to 60°C Coated thermocouple wire (vinyl φ0.32) × 2m (at ordering)	MC-K7502 Clip type probe (red) (Sensor: Class 2) Range: --20 to 60°C Coated thermocouple wire (vinyl φ0.32) × 2m (at ordering)
MC-K7503 Telescopic probe (Sensor: Class 2) Range: -20 to 80°C Probe (φ8 to 18.7) x L (180 to 940mm) Coated thermocouple wire (vinyl φ0.32) × (0.6 to 1.36m) (at ordering)	MC-K7504 Waterproof type probe (conforming to JIS C 0920 IPX7) (Sensor: Class 2) Range: -50 to 200°C φ5×L20mm (SUS430) Coated thermocouple wire (vinyl φ0.65) × 3m
MC-K7505 Air temperature probe with sensor cord type (Sensor: Class 2) Range: -20 to 60°C (W)18×(H)51.3×(D)10.3mm Coated thermocouple wire (vinyl φ0.32) x 3m	MC-K7506 Air temperature probe plug-in type (Sensor: Class 2) Range: -20 to 60°C (W)18×(H)51.3×(D)10.3mm (at ordering)
Junction cable for thermocouple sensor Coated thermocouple wire (vinyl φ0.32) x 1m (at ordering)