Máy đo độ ẩm, nhiệt độ Sato SK-810PT

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy đo độ ẩm, nhiệt độ Sato SK-810PT

Mã sản phẩm: SK-810PT

Tình trạng:

Máy đo độ ẩm, nhiệt độ Sato SK-810PT

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

SK-810PT can precisely detect temperatures with 0.01°C resolution in the range of -100 to 360°C. Six optional PT100 probes are provided. This thermometer will take the place of mercury filled standard glass thermometers so far used. (Probes are sold separately)
SK-810PT can precisely detect temperatures with 0.01°C resolution in the range of -100 to 360°C. Six optional PT100 probes are provided. This thermometer will take the place of mercury filled standard glass thermometers so far used. (Probes are sold separately)

	•		Display of various calculation results (Image No.1) The maximum (MAX), minimum (MIN), relative (REL) and moving average (AVG) values are calculated and displayed.
	•		Functional, Durable and Stylish (Image No.2) To help improve visibility and legibility, the display uses large numeric characters and tilts at about seven degrees when placed on a desktop. The wall-mount hook can be pulled out when necessary, so the design remains flat. (Image No.3) (The neck strap hole is provided on the bottom of the case.) Damage due to dropping is minimized by the protective rubber around the case.
	•		Highly waterproof indicator (JIS C 0920 "IPX7" compliant) The main unit is highly waterproof when the sensor is securely connected, and so can be touched by wet hands or splashed with water without risk. IPX7: When submerged in room-temperature water at a depth of 1 meter for 30 minutes, the device is not adversely affected by water infiltration.The indicator, however, cannot be used under water.
	•		Runs for up to 1000 operating hours with alkaline batteries Long-term measurement is possible with four AAA alkaline batteries (battery life varies with the conditions). Caution: Use of a nickel metal-hydride (NiMH) battery in a device with a sealed structure is prohibited by battery manufacturers in Japan. Please use manganese or alkaline batteries, not the rechargeable type.

Cat. No.	No.8012-00
Model	SK-810PT (main unit only)
Display range	-105.00 to 365.00°C
Resolution	0.01°C
Accuracy	±(0.05°C+1digit) at 23°C±5°C (Total accuracy is different depending on the probe connected)
Temperature coefficient	±(0.002%rdg + 0.008)°C/°C at other than 23°C±5°C
Waterproof property	Conforming JIS C 0920 IPX7 (when probe is connected)
Main functions	Max. value(MAX), Min. value (MIN), Measurement of variation(REL), Moving average(AVG)
Power	AAA size alkaline battery x 4 pcs.
Materials	ABS resin
Dimensions & weight	(W)70×(H)169×(D)42mm (exclusive of connector) Approx. 220g (inclusive of batteries)
Accessories	AAA size alkaline battery x 4 pcs vinyl cover, neck strap, instruction manual

Features and Specifications (Optional probes)

•

Optional probes specified
These optional probes of professional specifications can fully show the performance of the SK-810PT digital thermometer. In order to stably use for a long period, the probes are specified for lower, medium and high temperature ranges.
The sensing element is a platinum resistance temperature detector (Pt100, 4-wire) that ensures a maximum accuracy of ±0.16°C in each range by memorizing the characteristics of the individual element in the sensing part and having correction in the internal circuit of the main unit.

The probes are completely compatible with SK-810PT, and the highly accurate measurement is obtained when any one of them is connected with SK-810PT.

•

Calibrations
Available to calibrate the SK-810PT with a probe
As for the details, refer to here.

Range		For Lower Temperature		For Medium temperature		For High temperature
Handle shape		Grip	Sleeve	Grip	Sleeve	Grip	Sleeve
Cat. No.		No.8012-30	No.8012-50	No.8012-32	No.8012-52	No.8012-34	No.8012-54
Model		S810PT-30	S810PT-50	S810PT-32	S810PT-52	S810PT-34	S810PT-54
Range		-100.00 to 50.00°C		0.00 to 200.00°C		150.00 to 360.00°C
Accuracy		±0.10°C
Waterproof Property		compliant to JIS C 0920 IPX7 (at connected with probe)	---	compliant to JIS C 0920 IPX7 (at connected with probe)	---	compliant to JIS C 0920 IPX7 (at connected with probe)	---
Element		Pt100 (4 wires)
Materials	Sensing part	SUS316
	Handle	SUS304
	cord	silicon coating
Dimensions	Sensing part	φ3.2×250mm round end				φ3.2×300mm round end
	Handle	φ18×107mm	φ8×40mm	φ18×107mm	φ8×40mm	φ18×107mm	φ8×40mm
	cord	1.5m
Weight		208g	65g	208g	65g	210g	67g
Accessory		Instruction manual Test result (at 0°C )		Instruction manual Test result (at 100°C )		Instruction manual Test result (at 200°C )

General-purpose probe
The sensing element is a platinum resistance temperature detector (Pt100, 4-wire) that covers a wide measuring range of -100 to +200 °C with high accuracy. The combined accuracy (main body and probe) is ±0.41°C (±0.21°C at 0°C). This probe is also interchangeably used with SK-810PT.

* When the thermometer is used in a specified range, use of the dedicated probe for lower, medium and high temperature is recommended for more accurate measurement.

The calibration certificate is available at option

Name		General-purpose probe
Cat. No.		No.8012-10
Model		S810PT-10

Measuring range		-100.00 to 200.00°C
Accuracy		±(0.15°C+0.002\|t\|) *\|t\|: absolute value
Waterproof rate		JIS C 0920 IPX7 (When the probe is connected with a main unit)
Temp. element		PT100 (4 wires)
Materials	Sensing stem	SUS304
	Grip	Phenol resin
	Cord	Fluorine resin coating
Dimensions	Sensing stem	approx. φ3.2×150mm round end
	Grip	approx. φ15×100mm
	Cord	approx. 1.0m
Weights		approx. 80g
Accuracy		Instruction manual Test result (one point at 0°C)

Optional Items

	•		Carrying case The SK-810PT and probes can be stored in this carrying case. The main unit and the clip can be put on the upper stull and three probes can be stored on the lower stull. Rigid sponge is used inside of the case for safety storage and transportation. The shoulder strap and the clip for holding a probe are provided as standard accessories.
	•		Clip for holding a probe This clip is useful to hold a probe on a wall, a beaker or equipment. NB. The clip is provided with No.8012-90 carrying case as an accessory.

Products	Carrying case for SK-810PT	Clip for holding a probe
Catalog No.	No.8012-90	No.8012-92
Materials	vinyl	SUS304
Dimensions	(W)470×(H)153×(D)168mm (exclusive of protrusion)
Weight	1.3kg	60g
Accessory	Shoulder strap, clip for No.8012-92 S810PT probe

Calibrations

Kind of probes		low temperature		Medium temperature		High temperature
Cat. No.		No.8012-30	No.8012-50	No.8012-32	No.8012-52	No.8012-34	No.8012-54
Model		S810PT-30	S810PT-50	S810PT-32	S810PT-52	S810PT-34	S810PT-54
Standard calibration point	Traceability	-50°C, 0°C, 50°C		0°C, 100°C, 200°C		150°C, 200°C, 300°C
	JCSS/A2LA	on inquiry