|
Measuring range |
Fe: 0 to 5000 μm / 0 ... 196.9 mils |
|
|
NFe: 0 to 3000 μm / 0 ... 118.1 mils |
|
Accuracy |
± (2% of reading + 1 μm / 0.039 mils) |
|
Resolution |
0.1 μm (0.0039 mils) (< 100 μm / 3.94 mils) |
|
|
1 μm / 0.039 mils (> 100 μm / 3.94 mils) |
|
Measurable materials |
Non-magnetic layers on steel, iron, ... |
|
|
Non-electrically conductive layers on aluminum, copper, ... |
|
Min. radius of curvature convex |
5 mm / 0.2 in |
|
Min. radius of curvature concave |
25 mm / 1 in |
|
Min. measuring surface |
Ø17 mm / 0.7 in |
|
Min. substrate thickness |
0.2 mm / 0.08 in (on magnetic materials) |
|
|
0.05 mm / 0.002 in (on non-magnetic materials) |
|
Probe mode |
Autom. Mode with material detection (Fe + NFe) |
|
|
Magnetic mode (Fe) |
|
|
Eddy current mode (NFe) |
|
Measurement mode |
Single measurement |
|
|
continuous measurement |
|
Calibration |
Multipoint calibration (1 ... 4 points for each group) |
|
|
Zeroing |
|
Units |
μm, mm, mils |
|
Data transfer |
USB 2.0 |
|
Storage |
A volatile measuring group (DIR mode) |
|
|
Four measuring groups with autom. Storage and max. 2000 readings (GEN mode) |
|
Statistical functions |
Number of Measured values, mean, minimum, maximum, standard deviation |
|
Alarm |
Display when the adjustable upper and lower alarm limits are exceeded |
|
Operating time |
Autom. Shutdown mode (3 min.) |
|
Power supply |
3 x 1.5V AAA batteries |
|
Display |
128 x 128 px LCD display |
|
Indicators |
Battery status |
|
|
Fault detection |
|
Operating conditions |
0 ... 50°C / 32 ... 122°F |
|
|
20 ... 90% RH not condensing |
|
Storage conditions |
-10 ... 60°C / 14 ... 140°F |
|
|
20 ... 90% RH not condensing |
|
Dimensions |
(L x W x H) 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5 in |
|
Weight |
With sensor and batteries: approx. 271 g / < 1 lb |