Hotline 24/7: 0986951455
Việt Nam English
Sản phầm nổi bật

MÁY ĐO LỰC ĐIỆN TỬ IMADA ZT SERIES

Mã sản phẩm: ZT
Tình trạng:

MÁY ĐO LỰC ĐIỆN TỬ IMADA ZT SERIES

Liên hệ
Liên hệ
Là loại máy đo lực điện tử
các model : ZTA-DPU-2N, ZTA-DPU-5N, ZTA-DPU-10N, ZTA-DPU-20N, ZTA-DPU-50N, ZTA-DPU-100N, ZTA-DPU-200N, ZTA-DPU-500N, ZTA-DPU-1000N, ZTA-DPU-5000N, ZTA-DPU-20KN
ZTS-DPU-2N, ZTS-DPU-5N, ZTS-DPU-10N, ZTS-DPU-20N, ZTS-DPU-50N, ZTS-DPU-100N, ZTS-DPU-200N, ZTS-DPU-500N, ZTS-DPU-1000N, ZTS-DPU-5000N, ZTS-DPU-20KN
Hãng sản xuất: IMADA - Japan

Specifications for Separate Sensor Model Digital Force Gauge ZT series

Model ZTA ZTS
Feature Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more. Standard model with the same benefit in performance as ZTA series but reduced functionality.
Accuracy +/-0.2%F.S.+/-1digit
Unit of measurement(*1) N, kgf, lbf (*2)
Display 4-digit Organic EL
Display update 16 / sec
Sampling rate 2000 / sec at maximum (*3)
Battery 8 hours (2 hours charge)
The battery is more consumed when connected to USB memory stick or linear scale.
Safe overload rating Approx.200%F.S.
Operating environment Temperature: 0 to +40 degree Celsius Humidity: 20 to 80%RH
Function Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory,
Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer,
+NG alarm, Off timer (auto power off), Dumping, Calendar display, Setting lock
1st/2nd peak,
Displacement detection at force peak,
Displacement 0 reset at selected force
Output USB, RS232C, Mitutoyo digimatic (*4), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG)
Sub comparator 2 steps (output of low or high judgment), USB flash drive, Displacement
Overload warning Approx.110%F.S. (Warning message and alarm)
External connecting switch SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Weight Indicator: Approx.490g   (Load cell: Please refer to each load cell specifications)
Dimensions Please refer to dimensions.
Accessory AC adapter, Inspection certificate, CD driver (including simple software for data log),
Attachments (The set of attachments varies according to range.), USB cable,Carrying case.
Adapter for a USB flash drive(*5)

*1 These are the specifications for International model.  Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
* 3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 Not always available for Mitutoyo digimatic products.
*5  USB flash drive is not included.


Model List for Separate Sensor Type Digital Force Gauge ZT series

*This model list is in the case of using DPU series load cell.

Model Capacity Display Resolution
ZTA-DPU-2N ZTS-DPU-2N 2N (200gf) 2.000N(2000mN) 0.001N(1mN)
ZTA-DPU-5N ZTS-DPU-5N 5N (500gf) 5.000N(5000mN) 0.001N(1mN)
ZTA-DPU-10N ZTS-DPU-10N 10N (1kgf) 10.00N 0.01N
ZTA-DPU-20N ZTS-DPU-20N 20N (2kgf) 20.00N 0.01N
ZTA-DPU-50N ZTS-DPU-50N 50N (5kgf) 50.00N 0.01N
ZTA-DPU-100N ZTS-DPU-100N 100N (10kgf) 100.0N 0.1N
ZTA-DPU-200N ZTS-DPU-200N 200N (20kgf) 200.0N 0.1N
ZTA-DPU-500N ZTS-DPU-500N 500N (50kgf) 500.0N 0.1N
ZTA-DPU-1000N ZTS-DPU-1000N 1000N (100kgf) 1000N(1.000kN) 1N(0.001kN)
ZTA-DPU-2000N ZTS-DPU-2000N 2000N (200kgf) 2000N(2.000kN) 1N(0.001kN)
ZTA-DPU-5000N ZTS-DPU-5000N 5000N (500kgf) 5000N(5.000kN) 1N(0.001kN)
ZTA-DPU-10kN ZTS-DPU-10kN 10kN (1000kgf) 10.00kN 0.01kN
ZTA-DPU-20kN ZTS-DPU-20kN 20kN (2000kgf) 20.00kN 0.01kN

*These models are only available for combining DPU series load cell and
Sensor Separate Model Digital Force Gauge ZT series.
You can select the load cell from various types. ( See IMADA load cells )

How to Make the Force Gauge Model?

1. Select the force gauge model from ZTS series or ZTA series.
2. Select the using load cell (e.g.  LM-100N, SW1-500N etc.).
3. The force gauge model name becomes the combined name of the selected force gauge and the load cell
(e.g.  ZTS-LM-100N, ZTA-SW1-500N etc.).

Bình luận facebook
Bình luận Form
go top