Máy đo PH Sato SK-670PH

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy đo PH Sato SK-670PH

Mã sản phẩm: SK-670PH

Tình trạng:

Máy đo PH Sato SK-670PH

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Pen Type Digital PH Meter SK-670PH

Pen type digital PH meter. Slender rod shaped sensor section can be directly inserted into a flask or a small container at measurement. Waterproof rate is IPX4. Availble to operate the unit with wet hands (function will not be affected). The sensor is not replaceable.
* This model is not usable for certification purpose

	.		Slender shaped sensor section The dimensions of the sensor section is 12 mm dia. x 115mm(L). Available to directly insert the sensor into a flask whose orifice is small.
	.		Auto temperature compensation (ATC)
	.		Three points calibration for high accurate measurement Calibration points: pH4.01, 6.86 and 10.01 (at 25°C)
	.		"Auto power-off" function turns off the unit 20 minutes after the power is turned on. This conserves battery life if you forget to turn off the unit.
	.		Hold function
	.		Waterproof rate conforming to IPX4 The unit will not be affected in function at the touch of wet hands

Specifications

Measuring factors		Hydrogen iron concentration, Liquid temperature
Display range	pH	2.00 to 12.00pH
	Temp.	0.0 to 50.0°C
Accuracy	pH	±0.20pH
	Temp.	±1.0°C
Resolution	pH	0.01pH
	Temp.	0.1°C
Functions		(1) 3 points calibration (pH 4.01, pH6.86 and pH10.01 at 25°C) (2) Auto power-off (3) Hold (4) Auto temperature compensation (ATC)
Waterproof rating		Conforming to JIS C 0920 IPX4
Operation ambient		Temp.: 0 to 50°C Humidity: less than 80%rh (no condensing)
Power requirement		Coin lithium battery CR2032 x 2 pcs.
Battery life		Continuous measurements for about 400 hours
Materials		Main body: ABS resin Sensor electrode: glass
Dimensions		Unit including probe: (W)36×(H)224×(D)20mm Sensor section: 12mm dia. × (L)115mm
Weight		approx. 63g (including batteries)
Accessories		(1) Coin lithium battery No. CR2032 2 pcs. (2) Glass electrode protection bottle 1 pc. (3) Instruction manual