Mũi định tâm Fuji Tool EDGE FINDER CERAMIC TYPE CER-10, CER-32A, CEZ-10

Mã sản phẩm: Mui d?nh tâm Fuji Tool EDGE FINDER CERAMIC TYPE CER-10, CER-32A, CEZ-10

Tình trạng:

Mũi định tâm Fuji Tool EDGE FINDER CERAMIC TYPE CER-10, CER-32A, CEZ-10

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

EDGE FINDER CERAMIC TYPE

Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.

Material	Probe:Ceramics（ZrO2） Shank:Steel（SKS）
Hardness	HRC58°
Repeated Accuracy	±0.002mm

CER-32A

Specification

Code No.	Model	Shank	Probe	Length	Proper Rotation
07-703	CER-10	φ10	φ10	84	500～750rpm
07-704	CER-32A	φ32	φ10	104	500～750rpm
07-803	CEZ-10	φ10(19)	φ10	80	450～600rpm

The ceramic probe(ZrO2) cuts off magnetism and without iron powder attached. Outstanding wear-resistance.

How to use

1. Equip the shank of the edge finder to a drill chuck or milling chuck; manually shift the probe slightly off its centre and let it rotate eccentrically.

2. Gently move the rotating edge finder closer and closer to the measured workpiece; when contact is established, eccentricity gets smaller. The probe (tip) then stops rotating.

3. Gently shift the probe again to make contact with the workpiece; the probe then will slide along the surface of the workpiece. This position is the reference position distanced 5mm away from the probe diameter.