Mũi định tâm Fuji Tool EDGE FINDER SRZ-10, SRZ-104, SR-12
Edge Finder (Steel Type) Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.
1. Equip the shank of the edge finder to a drill chuck or milling chuck; manually shift the probe slightly off its centre and let it rotate eccentrically. 2. Gently move the rotating edge finder closer and closer to the measured workpiece; when contact is established, eccentricity gets smaller. The probe (tip) then stops rotating. 3. Gently shift the probe again to make contact with the workpiece; the probe then will slide along the surface of the workpiece. This position is the reference position distanced 5mm away from the probe diameter.
Cảm ơn bạn đã gửi bình luận, bình luận của bạn sẽ được kiểm duyệt trước khi hiển thị trên website!