Technical Specifications
PAR-809C VARIABLE RESISTANCE REFERENCE
OVERALL RANGE
1.2E4 to 1.0E9 using 1% resistors
ACCURACY
±2% tolerance
CONTROLS
A 12 Position Rotary Range knob selects specific reference resistance values – Knob Height 1.0"
CONNECTIONS
2 Banana receptacles at end of case (used to connect device under test in series with selected resistance).
INDICATION
12 LED indication lights; one LED for each resistor position of the selector knob
Power
One 9 volts battery (included) for LED indicator light operation only. Battery does not influence performance of the resistor references.
CASE SIZE (LxWxH)
4.0” x 3.0” x 2.0” (11.4cm x 9.5cm x 5.1cm)
WEIGHT
10.5oz
PMT-872A ESD WRIST STRAP/FOOTWEAR CHECKER
TEST VOLTAGE & CURRENT
Nominal 9 volts and 0.006 µA to 1.0 mA
POWER
One (1) standard 9-volt battery, PROCELL, Eveready #216 (NEDA 1604, JIS 006P, IEC 6F22); or, Optional AC/DC converter.
FACTORY ADJUSTED MEASUREMENT RANGES & ACCURACY
Wrist Straps: 8.0x10
5 Ohms to 1.0x10
7 Ohms < ±5% (Factory Default)
Footwear: 8.0x10
5 Ohms to 1.0x10
8 Ohms < ±5% (Factory Default)
Wrist Straps: 8.0x10
5 Ohms to 3.5x10
7 Ohms < ±5%
Footwear: 8.0x10
5 Ohms to 3.5x10
7 Ohms < ±5%
TOGGLE RANGE SELECTION
UP for Wrist Straps and DOWN for Footwear
PUSH BUTTON
27 mm Diameter, Metal spring loaded
LIGHT INDICATORS (VERTICALLY ORIENTED. FROM TOP TO BOTTOM)
FAIL High: Red LED
PASS: Green LED with Audible Buzzer
FAIL Low: Red LED
BATTERY LOW: Yellow LED (At <8.2V Battery Voltage)
AUDIBLE SIGNAL
Fast, Individual "Beeping" Sound with Green PASS LED on.
OPERATING RANGE
5ºC to 49ºC (40ºF to 120ºF)
STORAGE TEMPERATURE
-15ºC to 60ºC (5ºF to 140ºF)
RELATIVE HUMIDITY:
0% to 90%
Battery Life:
40 hours typical
Dimensions:
115 mm x 69 mm x 26 mm
WEIGHT
6 oz.
PFP-861 FOOTPLATE
FOOT PLATE
Stainless Steel 8.5 x 11 inches with 1/8 inch insulated back plate, 10mm male snap installed
SNAP CONNECTOR
Female 10mm snap with attached banana receptacle
LEAD ASSEMBLY
Green, six (6) foot stranded copper equipped with standard male banana plugs at each end