Inspect the distortion of transparent materials like glasses and plastics

■ TS-8N   DISTORTION TESTER   Price:Yen298,000(without tax)	■ TS-9N   DISTORTION TESTER(MICRO SCOPE TYPE)   Price:Yen383,000(without tax)
	■ TS-MS-01   MICROSCOPE ADAPTER   Price:Yen 68,500～ (without tax)    It is an adapter for taking images. You can insert it into the eyepiece tube with an inner diameter of 30 mm and shoot with a CCD camera attached. Also when using a digital camera, you can shoot by attaching a dedicated digital camera adapter. Detail is Here

Glasses are heated in the process of production and made into various shapes. If there isn't enough Annealing treatment, invisible distortion may arise at inside of glasses. If the distortion still remains in the block, it would be break very easily even by a small damage. In extreme case, the glasses might deformed by curving spontaneously and crack might be caused due to heterogeneousness. By Distortion Tester you can find out distortion in insufficient Annealing Treatment products easily.
*Annealing : Process of heating glasses up to sufficient temperature, keep that temperature for curtain period, then cooling it very slowly. Purpose of this process is, get rid of residual stress, prevent decrease of hardness, machinability improvement, improving cold workability and adjustment of crystallized structure.

There is a scale 0° to 100° both right and left on the rotating frame. Position of 0° is normal state , and at the position of 90° most thick distortion color will appear.

At the time of inspection, at first you will find out the point of non-defective limit. Based on that point, you will use scales at rotary frame. If you can find out distortion color at lower point than the point where limit of non-defective product start to show coloring, you can judge that product has not enough Annealing Process.
If Annealing process is done enough, distortion will not show up. The more Annealing process were insufficient, the more distortion color were thick. Distortion color will differ a bit according to specimen.

By Microscope Type TS-9N, you can observe distortion on tiny samples clearly which would hard to find out by naked eyes by combining with high magnification Stereo Binocular.

Fluidity state of resin

P/N	TS-8N	TS-9N
Description	Distortion Tester	Microscope Type Distortion Tester
Size	235 x 235 x 400mm	235 x 235 x 470mm
Eyepiece type	Single type	Stereo Binocular type
Power	AC100V to 220V
Light sauce	White LED light with Light Controller
Magnification	NO	10 to 20x
Price	Yen298,000(without tax)	Yen383,000(without tax)