|
Model |
High-resolution model |
General-purpose resolution model |
|
DK805SAR, DK805SALR, DK805SAFR, DK805SAFLR, DK805SBR, DK805SBLR, DK805SBFR, DK805SBFLR |
DK805SAR5, DK805SALR5, DK805SAFR5, DK805SAFLR5, DK805SBR5, DK805SBLR5, DK805SBFR5, DK805SBFLR5 |
|
Measuring range |
5mm |
|
Maximum resolution |
0.1μm |
0.5μm |
|
Accuracy (at 20°C) |
1μm |
1.5μm |
|
Measuring force (at 20°C) |
Upward:0.35±0.25N |
|
Horizontal:0.40±0.25N |
|
Downward:0.45±0.25N |
|
Working temp range |
0～50℃ |
|
Storage temp range |
-20～60℃ |
|
Maximum response speed (*1) |
80m/min (42m/min) |
250m/min (100m/min) |
|
Air driving |
Vacuum suction
DK805SALR, DK805SAFLR, DK805SBLR, DK805SBFLR, DK805SALR5, DK805SAFLR5, DK805SBLR5, DK805SBFLR5 |
|
Reference point response speed |
Same as maximum response speed noted above |
|
Preference-point position |
Position where tde spindle is moved by 1 mm |
|
Protection grade |
Straight type:IP67 / Right-angle type:IP64 (IP67*2) |
|
Vibration |
20～2000Hｚ 100ｍ/s2 |
|
Impact resistance |
1000m/s2 11ms |
|
Supply voltage |
DC5V±5% |
|
Power consumption |
1W |
|
Output |
A/B/reference point, voltage differential line driver output (compliant with EIA-422) |
|
Mass*3 |
30g |
|
Feeler |
Provided with a carbide ball tip, mounting screw M2.5 |
Provided with a steel ball tip, mounting screw M2.5 |
Output cable lengtd
(up to succeeding electronic section) |
22m max. |
|
Accessories |
One copy of the Instruction Manual, two +P M4 x 5 screws, tightening nuts, clamp spanner, curved washers, mounting pins 1 each (for DK8**S*F** only),one hole elbow (for DK8**S*L** only), one spanner, and one copy of the supplementary remarks |