RP Series
Ceramic Plug Gauge (Zirconia)
Explanation about series
-
※The gauge tolerances are sufficiently accurate to comply with level IT2 of the JIS. If you need higher accuracy, please consult us.
Dimensions
Specifications
|
Set Range(mm) |
Tolerance |
Roundness/Cylindricity |
|
0.20… 25.00 |
It applies to JIS B7420. |
|
φD mm |
Hex Size (mm) |
L1/L2 mm |
Dimensions |
|
0.20… 1.00 |
5 |
20 |
Type I |
|
1.00… 4.00 |
10 |
30 |
Type II |
|
4.00… 6.00 |
|
6.00… 25.00 |
15 |
TYpe III |
Details of series
The RP series offers interchangeable go / no-go plug gauges made of ceramic (zirconia). When pin gauges of frequently used sizes must be replaced due to wear, or when special sizes are required, only the necessary gauges need to be purchased, while the same handles can continued to be used. This series offers cost-effective go / no-go plug gauges. ※Fixed type for diameters of φ3 and smaller.
Example of pug gauge application for making acceptance judgments
-
The item is accepted if the go pin gauge passes through and the no-go pin gauge cannot pass through.