Eisen Pin gauge package for calibrating micrometers EMC-1-10, EMC-2- 4, EMC-3

Mã sản phẩm: EMC-1-10, EMC-2- 4, EMC-3

Tình trạng:

Eisen Pin gauge package for calibrating micrometers EMC-1-10, EMC-2- 4, EMC-3

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

EMC Series

Pin gauge package for calibrating micrometers

Explanation about series

※The photo shows a package containing EMC-1-10 and EMC-2-4.

This series is used to correct micrometer instrumental errors, spindle screw feed errors (example 1), and the parallelism and plane for each 1/4 rotation of spindles and anvils (example 2). The pin gauges have heat-insulation handles, which prevent body heat from affecting performance and can be used in-house to calibrate micrometers and calipers in order to acquire and maintain ISO-9000 accreditation.

Specifications

Set Rangemm	Length mm	Tolerance	Roundness/Cylindricity	HRC Hardness
2.5～10.0	20	±0.3μm	0.3μm	58 or more
15.0～25.37	20	±0.5μm	0.5μm	58 or more

Details of series

Set No.	Set Rangemm	No.of Pins	Price(Yen)
EMC-1-10	2.50 5.00 5.12 5.25 5.37 5.50 10.00 15.00 20.00 25.00	10	30,000
EMC-2- 4	25.00 25.12 25.25 25.37	4	30,000
EMC-3	2.50 5.00 5.50 6.00 6.50 7.00 10.00 15.00 20.00 25.00	10	35,000

This product comes with measurement data, calibration certificates and traceability system diagrams as standard.

Example

Example 1

Measuring micrometer instrumental errors and spindle screw feed errors.

Micrometer instrumental errors can be corrected by measuring 2.50mm,5.00mm, 10.00mm, 15.00mm, 20.00mm and 25.00mm for comparison with actual measured values.

Example 2

Checking the parallelism and plane for each 1/4 spindle and anvil rotation.