Máy đo cân bằng động cơ Sigma SB-7006RL, SB-7006RLG, SB-7006RLGW Balance Moniter

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy đo cân bằng động cơ Sigma SB-7006RL, SB-7006RLG, SB-7006RLGW Balance Moniter

Mã sản phẩm: SB-7006RL, SB-7006RLG, SB-7006RLGW

Tình trạng:

Máy đo cân bằng động cơ Sigma SB-7006RL, SB-7006RLG, SB-7006RLGW Balance Moniter

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Máy đo cân bằng động cơ Sigma SB-7006RL, SB-7006RLG, SB-7006RLGW Balance Moniter

Measurement range
Applicable Rotors	Rigid Rotor, Grinding wheel(G:1-plane, GW:2-plane)
Balancing Speed	60min^-1 to 61,000min^-1
Resolution of rotational speed display	1 min^-1
Amplitude range of synchronized vibration	0.001 to 999 µm(at 6,000min^-1)
Resolution of vibration	0.001µm
Vibration input channel	2ch
Measuring method	Fixed-speed method
No. of Correction plane	1 or 2, selectable
Correction method
Polar coordinates	1° to 360° (angle resolution: 1°)
Components of unbalance vector	3 to 50
Correction weight	Add / Remove
Vibration analysis function
Unbalance Vibration Analysis	0.001 to 999µm (at 6,000min^-1)
Harmonic analysis	0.001 to 999µm (at 6,000min^-1)
FFT Analysis (Optional)	Maximum analysis frequency: 20kHz
Overall amplitude monitoring	Acc P、Acc RMS、Acc F、Vel R、Disp EQP (range Acc: 0.1 to 40m/s²)
Time domain Waveform (Optional)	800 lines max.
Others
USB memory port	Available as standard
USB interface	USB mini connector (transfer to PC for data and Screenshots)
microSD card slot	N/A
Eccentricity compensation	Available as standard
Measuring range selection	Automatic ranging
No. of stored work data	10
Graphic display	5.7" TFT color LCD (LED back light)
Set up operation	Dialog with touch screen
Power supply	AC adapter: AC 100 to 240V ±10% 50/60Hz
Environment	Temperature: 10 to 40°C, Humidity: 20 to 80％RH (Non-condensing)
Dimension of measuring unit	204(W) × 71(D) × 137(H)mm, (105(L)mm for printer option)
Mass of measuring unit	Approx. 1.7kg, (2.2kg for printer option)
Dimension of Carrying case	455(W) × 185(D) × 320(H)mm
Mass of Carrying case	Approx. 8.0kg (with main unit and all accessories)
Standard accessories
Vibration sensor	P12SC Sensitivity: 10pC/(m/s²) fixing magnet: KM-025C (Holding force: 100N) sensor cable: LN-041 (2.5m straight)
Low-speed Displacement Sensor	V10L Sensitivity: 0.5mv/µm Note:Vibration sensors for RL, RLB (type V10L) can be used only for low speed balancing. The sensors cannot be used for general vibration measurement purpose other than balancing. fixing magnet: MB-B (Holding force: 800N) sensor cable: 2.5m
Rotation sensor	SFS-M1H (with 2m cable) fixing magnet stand: DG1030 (Holding force: 800N) with manual and an adjust driver
AC adapter	UN318-0628 (DC6V 2.8A)
Circular protractor	822-0001 (ø15cm)
Manual	CD-ROM, Digest booklet
Optional
FFT Analyzer (-F)	Frequency analysis / Time domain Waveform
Unbalance correction	Balance weights arrangement for grinding wheel (7006RLG: 1-plane, 7006RLGW: 2-plane)
Vibration input channel	N/A
Internal Printer(-P)	Mechanical dot printer
Additional sensor for multi-point measurement	Vibration sensor:P12SC with cable:LN-041(2.5m)