Máy đo độ rung Aco 7144/3348D Infrasonic Meter

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy đo độ rung Aco 7144/3348D Infrasonic Meter

Mã sản phẩm: Aco 7144/3348D

Tình trạng:

Máy đo độ rung Aco 7144/3348D Infrasonic Meter

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Infrasonic Meter TYPE 7144/3348D is ultralow-frequency sound pressure level meter to measure infrasonic or aerial vibration generated by explosive eruption of volcanoes.Measurement of ultralow-frequency sound pressure is possible in the range 2Pa～632Pa and 0.1～100Hz.

Reduction of input impedance has been realized by the employment of ceramic sensor, which has then offered an environmental suitability such as long-term outdoor measurement.

Aerial vibration is rapid pulsation of air generated around the crater by the explosive eruption of volcanoes, which thus travels as low-frequency sound pressure.
Due to ultralow-frequency sound pressure, the aerial vibration can not be heard by human ear but easily vibrates the building walls or windows during the propagation, sometimes giving a big damage such as breakdown of windows.
Infrasonic Meter means air vibrations are generated when a rapid change in barometrical pressure happens in the crater because of the eruption of the explosion of the volcano, and the impact spreads as a sound wave.

Volcano SHINMOEDAKE viewed from our Miyazaki factory.

Installation site of Infrasonic Meter

【Specification】Infrasonic Meter TYPE 7144

Frequency range	0.1～100Hz
Sensitivity(including Preamp)	3.5mV/Pa
Dynamic range	0.0632Pa～632Pa（Effective value) (When each range is full-scale)
Sensor	Ceramic type
Preamplifier	Charge converter
Size	Φ23.77mm × 130mm

【Specification】Amplifier TYPE 3348D

Input	Channel	1Channel
	Terminal	6P connector(R03-R6F made by TAJIMI)
		A:+15V　B:-15V　C:SIG　E,F:GND
Output	Terminal	BNC connector (Digital:USB command)
	Voltage	Real-time waveform output ±1V/F.S.(632Pa)
	Digital	16Bit (±32767/F.S.)
Noise Level		2mVrms or less
Measurement Range		2Pa～632Pa(Effective value)
Range		2Pa/6.32Pa/20Pa/63.2Pa/200Pa/632Pa 6stages
Gain stability level		Within ±1%(Output terminal) Full-scale
Linearity		Within ±1%(Output terminal) Full-scale
Phase lag		±2°(Positive aspect)
Indicator		LCD:16 characters,2lines　Display cycle:1 second
		Display of Measurement value, Low-pass filter, Level range
Distortion of higher harmonics wave		1%
Frequency response		0.1Hz～100Hz ±3dB (when Low-pass filter OFF)
Dynamic response		time constant 1 second (Slow),10 seconds
Low-pass filter		100Hz -3dB　Attenuation feature -12dB/oct
Electric calibration		Electric calibration by built-in oscillator(sine wave of 80Hz)
I/O terminal		Control and digital output (USB1.1) of Infrasonic Meter by PC
Power		DC+12V ±10%　Terminal stand M3 or AC adapter
Power consumption		Approx.1.5W(Approx.115mA) or less
Operating temperature limit		-20℃～50℃ / 90％ or less(Dewfall strict prohibition)
Size and Weight		160(W)×94(H)×230(D)
External calibration		Piston phone 31.6Pa