Ono sokki Rotary Encoder for industrial use RP-1710/1730 series

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Ono sokki Rotary Encoder for industrial use RP-1710/1730 series

Mã sản phẩm: RP-1710/1730

Tình trạng:

Ono sokki Rotary Encoder for industrial use RP-1710/1730 series

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Specification

	Bottom-mount type RP-1710 series	Flange-mount type RP-1730 series
The number of output pulses	60, 100, 120, 180, 200, 240, 250, 256, 300, 360, 400, 480, 500, 512, 600, 720, 750, 800, 900, 960, 1000, 1024, 1200, 1250, 1280, 1440, 1500, 1600, 1800, 2000, 2048, 2400, 2500, 2560, 2880, 3000, 3600, 3750, 4000, 4096, 4500, 4800, 5000, 5120, 6000, 7500, 9000, 12000, 15000, 18000, 22500, 24000, 30000, 36000, 45000, 48000, 60000, 72000, 90000, 96000, 120000
Mechanical Specification
Maximum rotation speed	5,000 r/min
Maximum allowable shaft load	Radial: 80 N Thrust: 50 N
Shaft diameter	φ15 mm ^*1
Starting torque	15 mN・m ^*2
Moment of inertia	161 g・cm²
General Specification
Operation temperature range	AC type: -5 to +55°C DC type: -5 to +55°C
Humidity	95 %RH ^*3
Protection class	IP65 ^*4
Vibration resistance	98 m/s² ^*5
Shock resistance	980 m/s²^*6
Weight	3.3 kg
Electrical Specification
Output waveform	2-phase square waveform ^*7
Response frequency	100 kHz 500 kHz (line driver output only)
Output voltage	Hi: 10 V or more, Lo: 0.5 V or less^*8
Duty	50 ± 10 % or less
Phase difference	90 ± 25° or les
Signal accuracy (adjacent error)	See the table below
Output type	Totem pole(Standard)^*9 Open collector Line driver
Connection method	Terminal board or connector
CE marking	¡
Power requirement	AC 100 (50 mA) to 240 V (63 mA) or　DC 12 (83 mA) to 24 V (42 mA)

Adjacent error of the RP-1710/1730 series

Adjacent error	The number of pulses (P/R)
1/200 P or less	60, 100, 180, 250, 256, 300, 750, 4500, 6000
1/8.3 P or less	120, 200, 240, 360, 400, 500, 512, 600, 720, 900, 1000, 1024, 1200, 1250, 1280, 1500, 3000, 3750, 9000, 12000, 18000, 22500, 24000, 30000
1/4.6 P or less	480, 800, 1440, 1800, 2000, 2048, 2400, 2500, 2560, 7500, 36000, 45000, 48000, 60000
1/3.3 P or less	960, 1600, 2880, 4000, 4096, 4800, 72000, 96000
1/2.5 P or less	3600, 5000, 5120, 15000, 90000, 120000

*1 Can be attached a key as an option.
*2 When the rotating shaft is affixed with an oil seal.
*3 When at 40 °C / 8h, the rotating shaft is affixed an oil seal, with no condensation
*4 Applicable by affixing an oil seal to the rotating shaft and selecting terminal board as an option.
*5 Axial direction for 4h, up/down/left/right for 2h each
*6 Three times each in X, Y and Z directions, 98 m/s2 in the axial direction
*7 Zero-mark is available as an option
*8 Totem pole, open collector, line driver. Line driver output has 90-degree phase differential square waeform. RS422A compliant line driver output (equivalent to 26C31).
*9 Load resisntance is 470 Ω or more. Open collector output ( load resisntance 470 Ω or more. Open collector (DC40V, 50 mA or les), collector output, emitter output and line driver outout are available as options.

Về trang trước

Gửi emmail In trang