Bộ chuyển dữ liệu Magnescale Interface MG50-EC, MG50-CL, MG51, MF10-P1, MF10-P2, MF10-CM

Sản phầm nổi bật

Ebara

Atago

Tin tức mới nhất

Mã sản phẩm: B? chuy?n d? li?u Magnescale Interface MG50-EC, MG50-CL, MG51, MF10-P1, MF10-P2, MF10-CM

Tình trạng:

Bộ chuyển dữ liệu Magnescale Interface MG50-EC, MG50-CL, MG51, MF10-P1, MF10-P2, MF10-CM

Liên hệ

MG50-EC (EtherCAT) / MG50-CL (CC-Link)
- Fieldbus compatible main module interface unit. Maximum of 30 gauges can be connected to MG50-EC (maximum of 16 gauges for MG50-CL).
MG51
- Distribution module for MG50. When installing digital gauges over a long distance, extension cables aren't required when using a MG51. Ten gauges can be connected per unit. Maximum cable length is 30m.
MF10-CM
- Counter module for DF805S/812S series. MF10-CM is compatible with the MG50/51 series.

MG50 series Specifications
Magnescale reserves the right to change product specifications without prior notice.
Model name	Main module		Distribution module
Model name	MG50-EC	MG50-CL	MG51
Commnication protocol	EtherCAT	CC-Link	Data transferred to main module by dedicated protocol
Baud rate	100Mbps	Maximum downlink speed of 10 Mbps	-
Node address setting method	Set with decimal rotary switches or software	Set with decimal rotary switches	-
Node address range	000-192	Max. 64	-
Maximum connectable counter modules	30	16	10
Maximum connectable distribution modules	8		-
Maximum cable length	Maximum cable length between main module and distribution module: 30m
Mounting method	35mm DIN rail mounting
Power supply voltage	DC24V(20.4-26.4V)
Power consumption / Consumption current / Current consumption	2.4 W or less 100 mA or less		2W or less 80 mA or less

MF10 series Specifications
Magnescale reserves the right to change product specifications without prior notice.
Model name	Digital tolerance indicator		Counter module
Model name	MF10-P1	MF10-P2	MF10-CM
Function	NPN output (current sink)	PNP output (current source)	Counter module for MG50
I/O	Number of Go/No Go judgement output 2, Number of external inputs 1		-
Minimum display unit	0.1μm
Cable length	input/output, power cable 2m		-
Mounting method	35mm DIN rail mounting
Power supply voltage	+10-30V DC including ripple (p-p) 10%
Power consumption / Consumption current	2.1W or less / 85A or less
Mass	75g