Bộ đếm Magnescale Counter LY71

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Bộ đếm Magnescale Counter LY71

Mã sản phẩm: LY71

Tình trạng:

Bộ đếm Magnescale Counter LY71

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

For measurements and control in diverse field uses. The required output board can be extended.

Various outputs are enabled by mounting extension boards
- -BCD Output (Option)
- -Comparator Function: Relay / Open-collector (Option)
Peak Hold Function Convenient for Statistical Measurement
Convenient External Input Functions for Automatic Measurement
Display Resolution Switching
Data Storage
Reset/Preset/Restart
Detecting Reference Point of Measurement Unit
Scaling
Flicker Control

Specifications

Specifications
Magnescale reserves the right to change product specifications without prior notice.
Model	LY71
Specifications by application	-
Number of input shafts	1 or 2 axes (2-axis add function available; addition only is displayed when adding)
Display	7 digits and minus display, Color amber
Display data	Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values
Input resolution	Standard : 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min Expanded : 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, and 1 degree can be added.
Display resolution	Measuring unit input resolution or higher and supported inch units
Input signal	A/B quadrature signal, Z signal (Conforms to EIA-422)
Alarm display	Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
Reset	Current value reset, Alarm cancel
Restart	Restart of peak value calculation for each axis/all axes
Preset	It is possible to store/edit up to three values for each axis.
Master calibration function	The master calibration value is relocated when going past the reference point after the power is turned on.
Reference point operations	It is possible to store/edit one value for each axis (when not using the master calibration function).
Hold function	Selectable from latch and pause Latch : Display held while latched (Display hold) Pause : Peak calculation stopped while paused (Peak calculation hold)
Linear compensation	A fixed compensation amount is applied to the measuring unit's count value. Compensation amount Standard: ±600 μm/m (Expanded: ±1000 μm/m)
Scaling	0.100000～9.999999
I/O	Expansion board for BCD(option:LZ71-B), available 1 or 2 pics. Expansion board for comparator(option:LZ71-B)
Power supply	DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option
Power consumption	MAX. 32 VA connected at the AC adaptor.
Temperature	Operating : 0～40℃(non condensing) Storage : -20～60℃(non condensing)
Mass	Approx. 1.5kg