|
Model |
RCA, RDA, RNA, RNAE, RPA, RPAE |
|
Wiring method |
RCA, RDA: 2 wire, RNA, RNAE, RPA, RPAE: 3 wire |
|
Switching logic |
RCA: SPST N.O., RDA, RNA, RNAE, RPA, RPAE: Solid state output, normally open |
|
Switch type |
RCA: Reed switch, RDA: Without contact, RNA, RNAE: NPN current sinking, RPA, RPAE: PNP current sourcing
|
|
Operating voltage |
RCA: 5~240V DC/AC, RDA: 5~30V DC, RNA, RNAE, RPA, RPAE: 5~30V DC |
|
Switching current |
RCA: 100mA max. , RDA: 50mA max. RNA, RNAE, RPA, RPAE: 200mA max. |
|
Switching rating |
RCA: 10W max. RDA: 1.5W max. RNA, RNAE, RPA, RPAE: 6W max. (※1) |
|
Current consumption |
RNA, RPA: 15mA@24V DC max. RNAE, RPAE: 6mA@24V DC max. |
|
Voltage drop |
RCA: 3.5V max. RDA: 3.7V max. RNA, RPA: 1.5V max. RNAE, RPAE: 0.5V max. |
|
Leakage current |
RDA: 0.1mA max. RNA, RNAE, RPA, RPAE: 0.01mA max. |
|
Indicator |
RCA, RPA, RPAE: Green LED, RDA, RNA, PNAE: Red LED |
|
Cable |
RCA, RDA: φ4,2C,PVC, RNA, RNAE, RPA, RPAE: φ4,3C,PVC |
|
Temperature range |
-10~+70℃ (No freezing) |
|
Shock |
RCA: 30G, RDA, RNA, RNAE, RPA, RPAE: 50G (※2) |
|
Vibration |
9G (※3) |
|
Enclosure classification |
IEC 60529 IP67 |
|
Protection circuit |
RCA: 1, RDA: 3,4, RPA, RNA: 2,3,4, RNAE, RPAE: 3,4 (※4) |
|
Weight |
46g (2m cable) |
|
Remark |
※1. Warning: Never exceed rating (watt=voltage×amperage). Permanent damage to sensor will occur.
※2. Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time.
※3. Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time.
※4. 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |