RCD
Assembling style: MCDB, MCRB, MCRPMS.
|
Wiring method |
2 wire , 3 wire |
|
Switching logic |
SPST normally open, Solid state output, normally open |
|
Switch type |
Reed switch, Without contact, NPN current sinking, PNP current sourcing |
|
Operating voltage |
5~120V DC/AC, 5~30V DC |
|
Switching current |
100mA, 50mA, 200mA (max.)
|
|
Contact rating |
10W, 1.5W, 6W (max.) (※1) |
|
Current consumption |
6mA@24V DC max. 8mA@24V DC max. |
|
Voltage drop |
3.5V, 3.7V, 0.5V@200mA, 1V@200mA (max.) |
|
Leakage current |
0.1mA, 0.01mA (max.) |
|
Indicator |
Red LED, Green LED |
|
Cable |
φ2.8, 2C, φ2.8, 3C |
|
Temperature range |
－10~+70℃ (No freezing) |
|
Shock |
30G, 50G (※2) |
|
Vibration |
9G (※3) |
|
Enclosure classification |
ICE 60529 IP67 |
|
Protection circuit |
RCD: 1, RND, RPD: 2, 3, 4 RDD, RNDE, RPDE: 3,4 (※4) |
|
Weight |
20 g (2m cable) |
|
Remark |
※1. Warning: Never exceed rating (watt=voltage×amperage). Permanent damage to sensor will occur.
※2. Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time.
※3. Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time.
※4. 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |