RCE
Assembling style: MCFA, MCGB, MCGD, MCGJ, MCG3, MCGS, MCDA, MCSH, MCSS, MCSF, MCRA, MCJA, MCJQ, MCJT, MCKB, MCKC, MCHA, MCHB, MCHC, MSB*, MSL*, RCE-Voltage range: 5~220V DC/AC , RDE / RDE-D-Voltage range: 10~28V DC , RNE,RPE-Voltage range: 5~30V DC.
|
Wiring method |
2 wire, 3 wire |
|
Switching logic |
SPST normally open, Solid state output, normally open |
|
Switch type |
Reed switch, NPN current, NPN current sinking, PNP current sourcing |
|
Operating voltage |
5~220V DC/AC, 10~28V DC, 5~30V DC |
|
Switching current |
50mA, 80mA, 200mA (max.) |
|
Switching rating |
10W, 1.5W, 2W, 6W (max.) (※1) |
|
Current consumption |
6mA@24V DC, 10mA@24V DC, 12mA@24V DC (max.) |
|
Voltage drop |
3.5V, 4V, 0.5V, 1.5V (max.) |
|
Leakage current |
0.01mA, 0.1mA, 1mA (max.) |
|
Indicator |
Red LED, Green LED |
|
Cable |
φ2.8,2C,PU, φ3.0,3C,PU |
|
Temperature range |
－10~+70℃ (No freezing) |
|
Shock |
30G, 50G (※2) |
|
Vibration |
9G (※3) |
|
Enclosure classification |
IEC 60529 IP67 |
|
Protection circuit |
1 (RCE), 3,4 (RDE,RNE,RNEE,RPE,RPEE), 2,3,4 (RDE-D) |
|
Weight |
20g (2m cable) |
|
Remark |
※1. Warning: Never exceed rating (watt=voltage×amperage). Permanent damage to sensor will occur.
※2. Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time.
※3. Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time.
※4. 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |