Eisen Limited Thread Gauge SPO series

Mã sản phẩm: SPO

Tình trạng:

Eisen Limited Thread Gauge SPO series

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

SPO Series

One-way Thread Gauge ２→１

Explanation about series

This gauge make operating efficiency improve from the double measurement to just once!

The one-way thread gauge make operational efficiency improve with just one measurement as opposed to an existing plug gauge must take a double measurement (Go / Not-Go).
A passing grade is that the GO-side thread plug gauge section can be easily inserted in a tapped hole and it stops up to the end face of the gauge stopper.
Can privent an inspection error, because the go side gauge is guide.

Features

A removable hexagonal aluminum handle is attached.
The handle section uses a left-thread configuration to prevent over tightening.
The gauge material is Gauge steel (SKS3, HRC58 or harder), and the gauge has exceptional wear resintance.
An inspection report for the thread gauge is included with to provide confidence and assurance for users!

How to Use

A passing evaluation is that the GO-side thread plug gauge section can be easily inserted in a tapped hole and stop up to the end face of the gauge stopper.

One-way Thread Gauge ２→１ SPO series

Notation Example

Type of thread	Pitch P		Thread L1	Stopper L2	Stopper φD	Full length L3	Hexagonal handle H	Gauge type	Class
M1.4	0.3	coarse	3	6.5	4	30	10	GPIP (for JIS inspection) GPWP (for JIS work) GPNP （ISO）	Ⅱ (JIS class) 6H (ISO class) ※M1.4[5H]
M1.6	0.35	coarse	3.5	6
M1.7	0.35	coarse
M1.8	0.35	coarse
M2	0.4	coarse	4	7	7
M2.3	0.4	coarse	4	7
M2.5	0.45	coarse	4.5	6.5
M2.6	0.45	coarse	4.5	6.5
M3	0.5	coarse	5	6
M4	0.7	coarse	7	9	8	40
M5	0.8	coarse	8	8	8
M6	1.0	coarse	10	9	10
M7	1.0	coarse	10	9	10
M8	1.25	coarse	12.5	10	12
M8	1.0	fine	10	12.5	12
M10	1.5	coarse	15	11	14		12
M10	1.25	fine	12.5	13.5
M10	1.0	fine	10	16
M12	1.75	coarse	17.5	11.5	16
M12	1.5	fine	15	14
M12	1.25	fine	12.5	16.5
M14	2.0	coarse	20	12	18		17
M14	1.5	fine	15	17	18
M16	2.0	coarse	20	12	20
M16	1.5	fine	15	17	20
M18	2.5	coarse	25	13	22
M18	1.5	fine	15	23	22
M20	2.5	coarse	25	13	24
M20	1.5	fine	15	23	24

※Other specifications are available (effective diameter can be changed for fine, extra-fine, unified, and pre-plating sections).

Custom One-Way Thread Gauges

Notation Example

Type of thread	Pitch P		Gauge Length K (0.1mmStep)	Thread L1	Stopper L2	Stopper φD	Full length L3	Hexagonal handle H	Gauge type	Class
M1.4	0.3	coarse	1.2 ～5.0	K+3P	6.5	4	30	10	GPIP (for JIS inspection) GPWP (for JIS work) GPNP （ISO）	Ⅱ （JIS class） 6H （ISO class) ※M1.4[5H]
M1.6	0.35	coarse	1.4 ～5.0		6
M1.7	0.35	coarse	1.4 ～5.0
M1.8	0.35	coarse	1.4 ～5.0
M2	0.4	coarse	1.6 ～7.0		7	7
M2.3	0.4	coarse	1.6 ～7.0		7
M2.5	0.45	coarse	1.8 ～9.0		6.5
M2.6	0.45	coarse	1.8 ～9.0		6.5
M3	0.5	coarse	2.0 ～9.0		6
M4	0.7	coarse	2.8 ～12.5		9	8	40
M5	0.8	coarse	3.2 ～12.5		8	8
M6	1.0	coarse	4.0 ～17.5		9	10
M7	1.0	coarse	4.0 ～17.5		9	10
M8	1.25	coarse	5.0 ～20.0		10	12
M8	1.0	fine	4.0 ～20.0		12.5	12
M10	1.5	coarse	6.0 ～25.0		11	14		12
M10	1.25	fine	5.0 ～25.0		13.5
M10	1.0	fine	4.0 ～25.0		16
M12	1.75	coarse	7.0 ～30.0		11.5	16
M12	1.5	fine	6.0 ～30.0		14
M12	1.25	fine	5.0 ～30.0		16.5
M14	2.0	coarse	8.0 ～32.0		12	18		17
M14	1.5	fine	6.0 ～32.0		17	18
M16	2.0	coarse	8.0 ～32.0		12	20
M16	1.5	fine	6.0 ～32.0		17	20
M18	2.5	coarse	10.0 ～36.0		13	22
M18	1.5	fine	6.0 ～36.0		23	22
M20	2.5	coarse	10.0 ～40.0		13	24
M20	1.5	fine	6.0 ～40.0		23	24

※Other specifications are available (effective diameter can be changed for fine, extra-fine, unified, and pre-plating sections).

Special Configurations

Measurement of threaded hole coaxiality (alignment)

Measurement of threaded hole and tapped hole

Measurement of helical (planet) tap machining allowance

Calibration Process

Not-go side section is only 2 pitch, but removing the stopper make calibration as standard thread gauges.
Removing the stopper does not need an exculsive tool.