I. LS223+F5N3 Coating Thickness Gauge Introduction
Linshang LS223 + F5N3 coating thickness gauge also called coating thickness tester is an instrument that separates the host from the probe. The maximum measuring range of the probe is 5000μm and the meter can automatically identify the measuring substrate. This instrument uses both Hall Effect and eddy current measurement principles to measure the non-magnetic coating thickness on magnetic substrates and the non-conductive coating thickness on non-magnetic substrates. It is a dual-use instrument for both iron and aluminum.
LS223 coating thickness gauge
II. LS223+F5N3 Coating Thickness Gauge Application
LS223 + F5N3 coating thickness tester is widely used in hardware manufacturing, shipbuilding, aerospace, mechanical equipment evaluation and other fields. This meter is especially suitable for large thickness coating inspection. The following are a few examples of practical applications of the LS223 + F5N3 coating thickness gauge for reference. (The following measurement industries do not represent all)
LS223 paint thickness gauge test different materials
LS223 coating thickness gauge used in different places
III. LS223+F5N3 Coating Thickness Gauge Parameters
|
Parameter |
LS223 Coating Thickness Tester |
|
Probe tip |
Ruby fixed |
|
Probe type |
F5N3 probe |
|
Measuring principle |
Fe:Hall Effect / NFe: Eddy current |
|
Measuring range |
Fe:0.0-5000μm NFe:0.0-3000μm |
|
Resolution |
0.1μm:(0μm-99.9μm)
1μm:(100μm-999μm)
0.01mm:(1.00mm-5.00mm)
|
|
Accuracy |
≤±(3% reading+2μm):0-3000μm
≤±(5% reading+2μm):3000-5000μm
|
|
Unit |
μm / mil |
|
Measuring interval |
0.5s |
|
Minimum measuring area |
Ø = 25mm |
|
Minimum curvature |
Convex:5mm / Concave:25mm |
|
Minimum substrate thickness |
Fe:0.2mm / NFe:0.05mm |
|
Display |
128×64 dot matrix LCD |
|
Power supply |
2pcs of 1.5V AA alkaline battery |
|
Range of operation temperature |
0℃-50℃ |
|
Storage temperature range |
-20℃-60℃ |
|
Host size |
126*66*35 mm |
|
Probe size |
22*26*55 mm |
|
Weight(with battery) |
160 g |
LS223 paint thickness meter dimension
IV. LS223+F5N3 Coating Thickness Gauge Characteristics
1. The probe supports trigger power-on, it can automatically identify the measurement substrate and automatically switch
2. No calibration is required, just simple zero adjustment for a new measurement.
3. The LS223 coating thickness tester has wide measurement range and the thickest measured materials can be 5mm.
LS223 coating thickness gauge test large thickness materials
4. Adopting advanced digital probe technology to provide good measurement accuracy and measurement repeatability to ensure the inspection of Chinese national metrology. The test data of Linshang LS223 coating thickness gauge can be compared with the test data of foreign coating thickness gauge.
5. The instrument has the temperature compensation function and digital function of the analog signal end, which can make the sensor signal of the coating thickness gauge more stable. The test accuracy of the instrument is not affected under the condition of large temperature changes.