|
Item |
MX-Z2000H |
MX-Z2050H |
MX-Z2055H*1 |
Processing
laser |
Type |
Fiber laser Wavelength: 1,062nm |
|
Laser class |
Class 4 (IEC60825-1) |
|
Average output |
20W (Fiber laser transmitter output) |
|
Laser output mode |
Standard mode/EE mode*2 |
|
Repetition frequency |
Standard mode 10 to 1,000kHz in 0.1-kHz steps/EE mode*2 10 to 100kHz in 0.1-kHz steps |
|
Pulse-train width(pattern)setting |
Standard mode 7.5ns~300ns(15patterns)/EE mode*2 150ns~450ns (3patterns) |
Guide laser and
focus pointer |
Type |
Semiconductor laser wavelength: 655nm |
|
Laser class |
Class 2 (IEC60825-1) |
Optical
specifications |
Marking area |
90×90mm |
160×160mm |
160×160mm |
|
Working distance |
170±10mm |
220±10mm |
220±10mm |
Scanning
specifications |
Scan speed |
1~12,000mm/s |
|
Marking resolution |
2μm |
4μm |
4μm |
|
Detail of marking |
Text |
original / original2 / OCR-A / OCR-B / SEMI / LM font / True Type font |
|
Bar code |
CODE39 / NW-7 / ITF / CODE128 / JAN
GS1 Databar Omni-directional / GS1 Databar Truncated/GS1 Databar Limited / GS1 Databar Expanded |
|
2D code |
QR code / Micro QR code / DataMatrix(ECC200)/ GS1 DataMatrix(ECC200) |
|
shape |
Fixed point / Straight line / Rectangle / Circle / Arc |
|
3D shapes |
Slope / Step / Cylinder / Truncated Cone / Sphere |
|
Image and CAD |
BMP/JPG/PNG/DXF |
|
Settings |
No. of data/blocks |
Marking data:10,000. ; blocks:2,048 |
|
Text setting |
0.1mm~120mm |
|
Cables |
Fiber cable |
4.5m Minimum bending radius: 100mm |
Marker head control cable
Marker head power supply cable |
5m Minimum bending radius: 100mm |
External
interface*3 |
Terminal block and I/O connector |
Terminal block input 20pins(NPN/PNP compatible); terminal block 14pins(NPN/PNP compatible)
I/O connector 37pins(NPN/PNP compatible),interlock terminal I/O: 8pins |
|
Serial communications |
RS-232C/RS-422A |
|
Ethernet communication |
Ethernet(1000BASE-T/100BASE-TX/10BASE-T) / EtherNet/IP™ |
|
Power supply voltage |
100 to 120VAC,50/60Hz ; 200 to 240VAC,50/60Hz |
|
Over voltage category |
CAT Ⅱ |
|
Power consumption |
at 100VAC: maxmum 390VA , at 200VAC: maxmum 420VA |
Ambient
conditions |
Operating ambient temperature*4,humidity |
0 to 40℃, 35 to 85%RH(no condensation) |
|
Strage ambient temperature,humidity |
-10 to 60℃(no freezing) / 35 to 85%RH(no condensation) |
|
Installation environment |
Indoor , 3,000m, max |
|
Pollution degree |
2 |
|
Protection structure(head)*5 |
IP65 |
|
Coolin method |
Forced air cooling |
|
Weight |
Marker head Approx.15kg, Controller Approx.25kg |
|
Size |
Marker head W140×H230×D415mm(excluding projections), Controller W225×H430×D390mm(excluding projections) |
|
Installation direction |
Marker head All directions of up, down, left and right (intake vent on the left side face must not be blecked.)Controller Must be installed vertically. |
|
USB interface*6 |
USB memory: Controller front panel, Type A connector, keyboard/mouse:controller back panel ,TypeA connector |
|
Accessories |
Marker head controll cable, Marker head power supply cable, System key , Removable terminals(input and output, 1each),
Instruction sheet, CD-ROM(Office editing software*7, User's manual, Setup manual.,Translation table between Japanese and Chinese).
Interlock release connector, Cable tie, Waring labels |