Load measurement stand Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Load measurement stand Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Mã sản phẩm: Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Tình trạng:

Load measurement stand Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Load measurement stand that narrows function, and made to low price slimming

KS-501H(manual vertical load measurement stand)

- The load measuring instrument is installed by a vertical desk-top manual operation type, and it uses it for compression and the forced duction test.
- The installation board where the load measuring instrument was installed moves up and down.
- The permissible capacity at rated load center distance is 500N(about 50kgf).
- The width of the main body is 200mm×250mm in depth ×455mm in height.
- Weight is half 9kg compared with our standard load measurement stand "K-501H".
- The lineup to externals 10kN (about 1t) types that can correspond from the resin molding goods to the inspection of metal products is being examined.

Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of KS series

Main body externals dimensional drawing

Specification
Model	KS-501H
Size mm(length × side × depth)	455×200×250
Weight	About 9kg
Permissible capacity at rated load center distance	500N
The maximum stroke	150mm
Sending pitch	2.0mm/1rev.
Main body color	Ivory

KS-501E(electric vertical load measuring stand)

- The load measuring instrument is installed by a vertical desk-top electric operation type, and it uses it for compression and the forced duction test.
- The installation board where the load measuring instrument was installed moves up and down.
- The permissible capacity at rated load center distance is 500N(about 50kgf).
- The width of the main body is 200mm×300mm in depth ×530mm in height.
- Weight is half 13kg compared with our standard load measurement stand "K-501E".

Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of KS series

Specification
Model	KS-501E
Size mm(length × side × depth)	540×225×275 （ include projections）
Weight	About 13kg
Permissible capacity at rated load center distance	500N
The maximum stroke	150mm
Speed	5～200mm/min
Drive system	DC brushless motor
Power-supply voltage	AC100V～240V
Main body color	Ivory

KS-504H(manual vertical load measurement stand)※Special specification

- To reduce the inefficiency of work by the expansion of the deceleration ratio (steering wheel rotation ratio) according to making to a high load, the fast-forwarding mechanism was equipped normally. It is possible to do by the fast-forwarding operation such as return work and positional putting out after it measures it.
- It is the best load stand for compression and the tension test on a simple high load.
- The improvement of externals and the installation part where a load cell on hand and the force gauge cling is also possible.
- Permissible capacity at rated load center distance ･･･ 10KN(1ton)
- Weight ･･･ About 45kg～
- Combining acceptable model
･Push-pull tester: MPL-10KN(Be developing. )
･Digital force gauge: ARF-10KN(Be developing. )

※Special specification

Specification
Model	KS-504H
Size mm(length × side × depth)	690×280×400
Weight	About 45kg
Permissible capacity at rated load center distance	10KＮ
The maximum stroke	250ｍｍ
Sending pitch	0.116ｍｍ/1rev.
Sending pitch（Fast forwarding）	About 0.5mm/1rev.
Main body color	Ivory

※Special specification

Specification
Model	KS-504H
Size mm(length × side × depth)	595×500×540
Weight	About 60kg
Permissible capacity at rated load center distance	10KＮ
The maximum stroke	150ｍｍ
Sending pitch	0.16ｍｍ/1rev.
Sending pitch（Fast forwarding）	About 1.66mm/1rev

It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.

Về trang trước

Gửi emmail In trang