Load stand Attonic K-501H, Attonic K-501E, Attonic K-501HR, Attonic K-505H, Attonic K-505E, Attonic K-505HR, Attonic K-506H

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Load stand Attonic K-501H, Attonic K-501E, Attonic K-501HR, Attonic K-505H, Attonic K-505E, Attonic K-505HR, Attonic K-506H

Mã sản phẩm: Attonic K-501H, Attonic K-501E, Attonic K-501HR, Attonic K-505H, Attonic K-505E, Attonic K-505HR, Attonic K-506H

Tình trạng:

Load stand Attonic K-501H, Attonic K-501E, Attonic K-501HR, Attonic K-505H, Attonic K-505E, Attonic K-505HR, Attonic K-506H

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

Load stand where measurement for a long time when it sits in desk-top is possible

K-501H(manual vertical load measuring stand)

- It is small, light-weight and low price.
- The operating part was reinforced, and the minor change was done for a smooth mechanism to decrease swinging more.
- The height of the table was lowered, and long-time measurement was enabled at the desk-top.
- It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of K-501 series

Main body externals dimensional drawing

Specification
Model	K-501H
Size mm(length × side × depth)	470×245×350
Weight	About 22ｋｇ
Maximum load capacity	500N
The maximum stroke	150mm
Sending pitch	2.0ｍｍ/1rev.

K-501E(electric vertical load measuring stand)

- It is small, light-weight and low price in the field of Motorized type.
- The operating part was reinforced, and the minor change was done for smooth mechanism to decrease swinging more.
- Movement at maximum speed is enabled by pushing “high speed button” while operating, and repeated operation is improved.
- It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of K-501 series

Main body externals dimensional drawing

Specification
Model	K-501E
Size mm(length × side × depth)	520×250×350
Weight	About 30ｋｇ
Maximum load capacity	500N
The maximum stroke	１25ｍｍ
Sending pitch	10～100mm/min

To the head of this page

K-501HR(manual vertical load measuring stand)

Main body externals dimensional drawing

Specification
Model	K-501HR
Size mm(length × side × depth)	470×245×350
Weight	About 22ｋｇ
Maximum load capacity	500N
The maximum stroke	60ｍｍ

K-505H(manual horizontal load measuring stand)

- It is small, light-weight and low price.
- The height of the table was lowered, and long-time measurement was enabled at the desk-top.
- It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Main body externals dimensional drawing

Specification
Model	K-505H
Size mm(length × side × depth)	190×375×240
Weight	About 15ｋｇ
Maximum load capacity	500N
The maximum stroke	１25ｍｍ
Sending pitch	2.0ｍｍ/1rev.

To the head of this page

K-505E(electric horizontal load measuring stand)

- It is small, light-weight and low price in the field of Motorized type.
- Movement at maximum speed is enabled by pushing “high speed button” while operating, and repeated operation is improved.
- It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Main body externals dimensional drawing

Specification
Model	K-505E
Size mm(length × side × depth)	(235～255）×377×200
Weight	About 20ｋｇ
Maximum load capacity	500N
The maximum stroke	１25ｍｍ
Sending pitch	10～100mm/min

K-505HR(manual horizontal load measurement stand)

- It is small, light-weight and low price.
- It is lever type manual load measuringt stand.
- The height of the table was lowered, and long-time measurement was enabled at the desk-top.
- It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Main body externals dimensional drawing

Specification
Model	K-505HR
Size mm(length × side × depth)	280×370×200
Weight	About 15ｋｇ
Maximum load capacity	500N
The maximum stroke	60ｍｍ

To the head of this page

K-506H(manual horizontal load measuring stand)

- It is a large-scale, long size commodity.
- It is push-pull load measuring stand with maximum load capacity 2KN (200kgf).

- Combining acceptable model
・MPL series(1KN/2KN)、ARF series(1KN/2KN)

Main body externals dimensional drawing