Máy kt lực xiết Digital Torque checker Attonic ADT-C1, ADT-C2, ADT-C5, ADT-C10, ADT-C20, ADT-C50, ADT-C100, ADT-C200

Sản phầm nổi bật

Trusco

Tsubaki

OTSUKA

Ebara

Atago

Tin tức mới nhất

Vì sao khách hàng chọn mua máy nén khí Nhật bãi ?Tại sao máy nén khí trục vít Buma tạo được lòng tin với người tiêu dùng?Một vài sự cố sử dụng biến tần trong máy nén khí Lựa chọn máy nén khí Nhật Bản

Máy kt lực xiết Digital Torque checker Attonic ADT-C1, ADT-C2, ADT-C5, ADT-C10, ADT-C20, ADT-C50, ADT-C100, ADT-C200

Mã sản phẩm: ADT-C1, ADT-C2, ADT-C5, ADT-C10, ADT-C20, ADT-C50, ADT-C100, ADT-C200

Tình trạng:

Máy kt lực xiết Digital Torque checker Attonic ADT-C1, ADT-C2, ADT-C5, ADT-C10, ADT-C20, ADT-C50, ADT-C100, ADT-C200

Liên hệ

Thông tin sản phẩm hướng dẫn đặt hàng & vận chuyển

IIt is a high performance, precision, and easy-to use torque inspection instruemnt.

- Feature
It is mainly used to check the torque of electric driver.Of course, it can be used to check manual torque wrenches.
Common + bit can be used for checking with standard equipped attachment.
To correspond to customer's special bit, we will do a special processing.
(Additional cost will be charged. Please inquire. )

You can choose appropriate measuring range from 8 models from 1N･cm(0.1kgf･cm) to 20N･m(200kgf･cm) according to required torque.
The measuring torque value conforms to the torque data of Torque Analyzer (torque analysis system).
The digit number switch function ( 3 digits /4 digits ) was added under many customers’expectation.

Following functions are normally equipped .
・Digimatic output (printer output)
・RS-232C output
・Comparator output
・Analog output

- Accessory
・AC adaptor (IN:AC100V-240V OUT:DC9V 500mA) 1 piece
・Attachment for driver 1 piece
・Attachment for electric driver 1 piece
・Screw (Excluding a special attachment) for the attachment 2 pieces for each.
Attachment list according to the model

〈The data taking soft download is here. 〉

Catalog of ADT-C series / Manual of ADT-C series
Main body external dimensional drawin

- Connected cable externals dimensional drawing
RS-232C output connection : KC-210
Digimatic output connection : KC-220
Analog output connection : KC-230
Comparator output connection : KC-510

- Standard issue

Unit of measurement	N･m(N･cm)/kgf･cm/in･lb
Accuracy	±0.5%F.S.
Measurement method	Peak holding (maximum value)/tracking(present value)
Peak holding	Digital analog holding
Response speed	MAX.1mS
Display	Four digit LCD
Permissive load	120％
Power supply	Chargeable battery Ni-MH(For four charging time hours. )
Basic machine weight	About 3.2kg

Model	Range of measurement display	Range of minimum display	Attachment
ADT-C1	1.000～10.00Ｎ・cm/0.100～1.000kgf・cm/0.100～1.000in・lb	0.001Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C2	2.00～20.00Ｎ・cm/0.200～2.000kgf・cm/0.200～2.000in・lb	0.01Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C5	5.00～50.00Ｎ・cm/0.500～5.000kgf・cm/0.500～5.000in・lb	0.01Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C10	0.100～1.000Ｎ・m/1.000～10.00kgf・cm/1.000～10.00in・lb	0.001Ｎ・m/0.001kgf・cm/0.001in・lb	TC-3、 TSS-10
ADT-C20	0.200～2.000Ｎ・m/2.00～20.00kgf・cm/2.00～20.00in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-3、 TSS-20
ADT-C50	0.500～5.000Ｎ・m/5.00～50.00kgf・cm/5.00～50.00in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-6、 TSS-30
ADT-C100	1.000～10.00Ｎ・m/10.00～100.0kgf・cm/10.00～100.0in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-4、 TSS-30
ADT-C200	2.00～20.00Ｎ・m/20.0～200.0kgf・cm/20.0～200.0in・lb	0.01Ｎ・m/0.1kgf・cm/0.1in・lb	TC-4、 TSS-30

- Function explanation
Setting of each function can be operated by pushing “FUN”button for seconds.
Returning to measuring mode is also operated by pushing “FUN”button for seconds.

1. Setting of peak holding mode/tracking mode
Peak holding: The maximum value of measurement is displayed.
Tracking: The value of present measurement is displayed.
2. History of memory data
It is automatically memorized in the internal storage memory by pushing RESET button at peak mode .
(The value when the RESET button is pushed is memorized. )
3. Comparator setting
The display of HI/LO appears to the display by setting the upper bound value and the lower bound value.
(When the comparator output of the option is adhered, three kinds of judgments of HI/GO/LO are displayed by this set value. )
when the comparator output of the option has adhered. )
4. Setting at each measurement
3 kinds of unit {N･m(N･cm)/kgf･cm/in･lb} can be set.
5. Setting of overload
”Overload”indication can be displayed by setting maximum limit value of the result.
(Maximum limit value of the result can be basically set at percentage of the limit value. It cannot accept over 110% of the limit value. )
Example ･･･ When you measure the torque of fastening a work with appropriarte attachment, you can use this function to hold the measurement just before breaking the work by setting perticular limit value.
6. Auto power OFF setting
It is a function that the unit is turned off automatically when it doesn’t work for over five minutes.
If the function isn’t set, the unit isn’t turned off until battery shortage display is indicated.
7. Digit number switch setting
Its digital indication can be selected from 3 digits or 4 digits.
8. Reversing setting of display
It is a function that the display can be displayed reversely.
9. Battery shortage display
The battery line decreases when the battery decreases.
"BATT" appears in display when the battery line disappears.

To the head of this page

It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.

Về trang trước

Gửi emmail In trang