Features
-
Electrode needles made of a special alloy with low dust emission allow usage of the unit in a clean-room environment.
-
Control by the newly developed D.I.C. II circuit* not only ensures stability of the ion balance but also prevents degradation of ionization performance. It also enables significantly less frequent maintenance.
-
Being a DC-type unit, the ionizer generates far more ions than other units, resulting in high-speed ionization.
-
Alarm output comes as standard equipment, allowing the ionizer to output signals indicating its performance degradation or abnormality, such as a cleaning alarm and high-voltage alarm, to an external device immediately after its occurrence.
-
The ion balance can be fine-tuned to maintain 0-volt potential of the ionization area.
*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for static elimination by simultaneously controlling the ion balance and amount of ion generation.
Specifications
|
Model |
ND-503T |
|
Ion generation method |
DC corona discharge |
|
Discharging electrode needle |
Special alloy with low dust emission |
|
Recommended air pressure |
0.02 - 0.15MPa |
|
Amount of air consumption |
45 - 105L/min |
|
Amount of ozone production |
0.02 ppm or less(300mm) |
|
Operating environment |
Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation) |
|
Input condition |
AC100V 50/60Hz |
|
Power cable |
Approx. 2.8 m (power cable with grounding electrode) |
|
Power consumption |
4VA |
|
Mass |
1.5kg |
Temporal change of ionization performance
Ion balance・Ionization performance