Features
-
Use of a flat nozzle prevents diffusion of the air jet, ensuring precise dust and static elimination from the object.
-
A high-voltage power supply is embedded in the nozzle electrode. This increases safety and permits installation in a variety of locations because high-voltage cables are not exposed.
-
The compact dimensions allow the unit to be installed in a variety of locations including narrow spaces inside a device.
Specifications
Main body of static eliminator
|
Model |
NIF-300 |
|
Ion generation method |
High-frequency corona discharge method |
|
Discharging electrode needle |
Special alloy with low dust emission |
|
Recommended air pressure |
0.1 - 0.4MPa |
|
Amount of air consumption |
200 - 600L/min |
|
Alarm display |
Red LED lights when high voltage stops(Green LED lights at normal operation |
|
Terminal block |
DC24V input, Alarm output, Static elimination ON/OFF input, Ground wire |
|
Amount of ozone production |
0.02 ppm or less(150mm) |
|
Operating environment |
Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation) |
|
Input condition |
DC24V(dedicated AC adaptor or terminal block) |
|
Power consumption |
Approx. 2.0VA |
|
Mass |
Approx. 180 g |
Option
Dedicated AC adaptor
|
Model |
AC adaptor for NIF-300 |
|
Input voltage |
AC100-240V 50/60Hz |
|
Output voltage |
DC24V |
|
Mass |
Approx. 270 g |
Note: The AC adaptor is not included as standard. Please indicate appropriate model number when you order.
|
Model |
AC adaptor for NIF-300 |
|
NIF-300-1 |
With AC adaptor |
|
NIF-300-2 |
Without AC adaptor |
Ionization performance
Dimensions [mm] and names of parts