Hotline 24/7: 0986951455
Việt Nam English
Sản phầm nổi bật

Quạt thôi ion Fan type ionizer Kasuga ITI-02

Mã sản phẩm: ITI-02
Tình trạng:

Quạt thôi ion Fan type ionizer Kasuga ITI-02

Liên hệ
Liên hệ

Features

  • The newly designed fan guard enables high-speed  ionization even from a distance.
  • Control by the newly developed D.I.C. circuit* not only maintains a certain ion balance but also ensures a consistent amount of ion generation. This allows ionization in the optimal condition at all times, with no degradation of ionization performance. Frequency of maintenance can thus be significantly reduced.
  • The front fan guard can easily be removed with a single touch, which allows simple access to the area around the electrodes, ensuring easy maintenance.
  • When the ionizer is turned on, it displays the remaining interval before the next maintenance.
  • Electrode needles made of a special alloy with low dust emission allow use of the unit in a clean-room environment.

ITI-02_02.jpgWhen the unit is turned on, it displays the remaining interval before the next maintenance by the number of LED lamps lit.

*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for ionization by simultaneously controlling the ion balance and amount of ion generation.

 

Specifications

 

Main unit of the ionizer

Model ITI-02
Ion generation method DC corona discharge
Discharging electrode needle Special alloy with low dust emission
Method of ion balance control Control by D.I.C. circuit
Ion balance* Within ±10V (at time of factory shipment), permits fine tuning
Fan speed Variable (non-step)
Maximum air volume 3.0m3/min
Maximum airflow speed* 3.7m/sec
Alarm display Alarm lamp blinking Cleaning alarm, fan guard removal, high-voltage alarm
Alarm lamp staying lit high-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues)
Alarm output
(External output)
Ionization output During ionization (high-voltage output)
Alarm output While alarm lamp blinks or stays lit
External input Permits feedback input of electrostatic potential or ion balance
Amount of ozone production* 0.02 ppm or less
Operating environment Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition DC12V
Consumption current 750mA
Mass Approx. 2.3kg

*Measurement distance: 300mm

Dedicated AC adapter

Model AC adapter for ITI-02
Input conditions AC100 - 240V 50/60Hz
Output voltage DC12V
Mass 約385g

Bình luận facebook
Bình luận Form
go top