Model No. PD36
Deadweight testers for High Pressure
The PD36 dead-weight testers are used as the standard
pressure gauge for inspection and calibration of other
pressure gauges. They can be used as an on-site pressure
standard over a wide high pressure range (400 to 700MPa).
Feature
・The PD36 is electric deadweight tester with easy manipulation by actuation of switch controlling pressurization
and depressurization, rotation frequency and preliminary pressurization. The PD36 pressurizing operation is
also electrically driven.
・Taking dust proofing and safety into account, the deadweight section is built-in a panel.
・The amount of deadweight is displayed on a panel which can be easily monitored and manipulated.
・The ram position is detected contactless and is displayed by a lamp on a panel so that operation is not affected
regardless of its pressure value.
・With the PD36, fine adjustment of the pressure can be easily performed even under very high pressure by
means of a fine adjustment valve.
・JCSS Calibration Certification (Measuring range 400, 500MPa)
・NKS Inspection Certificate