Hotline 24/7: 0986951455
Việt Nam English
Sản phầm nổi bật

Thiết bị kiểm tra phim cách nhiệt LS163A Transmission Meter

Mã sản phẩm: LS163A Transmission Meter
Tình trạng:

Thiết bị kiểm tra phim cách nhiệt LS163A Transmission Meter

Liên hệ
Liên hệ

I. LS163A Transmission Meter Introduction

      Linshang LS163A window film transmission meter is an instrument for measuring the optical properties of uniform and transparent materials such as solar film, stick-film glass, heat-insulating glass and automobile side glass. We can select the measurement interface to display the infrared and ultraviolet rejection and transmittance. 

 


LS163A advantages video 

II. LS163A Transmission Meter Application

      LS163A window film transmission meter is mainly suitable for various solar film, glass manufacturers, car 4S shops, car beauty shops and other occasions. In addition to solar film and heat insulation film, it can also be used to measure various stick-film glass, automobile side glass and PC materials.

16320010601EN.jpg
LS163A window tint detector test different materials

III. LS163A Transmission Meter Parameters

UV Peak wavelength

365nm

IR Peak wavelength

1400nm

Visible light wavelength

380-760nm, conforming to the CIE photopic luminosity function 

Accuracy

 ±2% (Colorless and transparent material)

Resolution 0.1%
Test Slot 6mm *58mm (W*D)
Meter Size

120mm *75mm *25mm (L*W*H)

Display 128*128 Dot matrix LCD
Weight 187g (Include Batteries)
Power supply 4*AAA alkaline battery

 

Transmission Meter appearance
LS163A Transmission Meter appearance

IV. LS163A Transmission Meter Characteristics

1. The solar film transmission meter has only one button. The three test results will be displayed on the interface immediately after putting the materials into the test slot.

window tint meter test stick-film glass
LS163A window tint meter test stick-film glass

2.  The LS163A transmission meter adopt parallel light path design, the test slot width can be 6mm. The instrument can also test large thickness materials such as car side windshield.

16320010604.jpg
LS163A transmission meter test the car side windshield

3.  The display interface can be rotated 360 ° adaptively, which is convenient for reading data when testing at different angles

window tint meter rotative interface
LS163A window tint meter rotative interface

4. The LS163A solar film transmission meter has real time dynamic calibration function , the meter will make self-calibration after power on.

window tint meter pass self-calibration
LS163A window tint meter pass self-calibration

5. We can set the display data as UV and IR rejection rate, light transmission rate or light transmittance. Three measurement methods can be displayed.

measurement interface of transmission meter
LS163A window tint meter three measurement interfaces

6. The window film transmission meter has data lock function. Press the hold button after testing, the data will remain on the interface after taking away the tested materials.

LS163A tint tester data lock function
LS163A tint tester data lock function

7. The window film transmission meter has small size with anti-slip design. The anti-slip design is convenient for holding or carrying out.

16320010609.jpg
small size LS163A transmittance meter 

8. The instrument adopts LCD dot matrix screen with backlight, which can be used in dark environment.
9. The tint tester is powered by 4 AAA alkaline dry batteries with low power consumption. It can continuously measure for more than 100 hours. The meter will automatically shut down without operation after 3 minutes.

Bình luận facebook
Bình luận Form
go top