Features
- Available for metallic, pearl base, color clear, plating finishing, also available for solid base finishing.
- New designed Air cap and air circuit.
Realizing low pressure, small air consumption, less splashing, high atomization and less unevenness spraying in stable paint finishing.
Similar spraying pattern to FINER-GTC, and specializing in layer pattern spraying.
- Trigger designed with a good fit by using POM material, which is more durable than usual aluminum material.
- Laser marking with meiji logo on the air cap.
F-ZERO Type B/T/R is our discontinued model since February, 2022.
New model to take over would be FINER FORCE B/T/R.
Specifications
|
Model No. |
F-ZERO Type C |
|
Paint feed system |
Gravity |
|
Nozzle bore |
mm
(in)
|
1.4
(0.055)
|
|
Spraying pressure |
MPa
(PSI)
|
0.15
(22)
|
|
Spraying distance |
mm
(in)
|
150
(5.906)
|
|
Air consumption |
L/min
(cfm)
|
175
(6.2)
|
|
Paint spraying volume |
mL/min |
140 |
|
Maximum effective pattern width |
mm
(in)
|
220
(8.661)
|
|
Pattern shape |
Tulip |
|
Required compressor output |
kW |
1.5 or more |
|
Weight |
g
(lbs)
[oz]
|
290
(0.639)
[10.2]
|
|
Standard paint cup |
1G-2U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA |
-
Paint viscosity should be 15seconds for high solid 1k base using Meiji model V-1 viscosity cup.
-
Numbers in parentheses are for two-component urethane paint with paint viscosity of 12 seconds using Meiji model V-1 cup.
-
Fluid adjusting valve opening position : Open 4 turns (counter clockwise).
-
Air and paint inlet :G1/4.
|