Features
FINERⅡ PLUS Fine atomization and flat surfaces
Evolution model of FINERⅡ.
It is possible to spray wide range between touch-up & block paint due to adjusting spraying pattern width.
New design of air cap and fluid nozzle realizes higher atomization.
COMPATIBLE with WATERBORNE Industry's First
Mirror polished stainless steel in the nipple and nozzle passage realizes smoother delivery of fluid.
This leads to improvement in both washability and the prevention of paint adhesion.
GUN STAND
Our griginal gun stand is equipped, and it is possible for gun to stand by itself.
Also, wwith preventing the scratches of nozzle tip and air cap,
it avoids the deformation of spraying pattern.
Specifications
|
Model No. |
FINERⅡ PLUS |
|
Paint feed system |
Gravity |
|
Nozzle bore |
mm
(in)
|
1.4
(0.55)
|
|
Spraying pressure |
MPa
(PSI)
|
0.2
(29)
|
|
Spraying distance |
mm
(in)
|
200
(7.874)
|
|
Air consumption |
L/min
(cfm)
|
220
(7.8)
|
|
Paint spraying volume |
mL/min |
140 |
|
Maximum effective pattern width |
mm
(in)
|
300
(11.811)
|
|
Pattern shape |
Tulip |
|
Required compressor output |
kW |
1.5 or more |
|
Weight |
g
(lbs)
[oz]
|
295
(0.65)
[10.4]
|
|
Standard paint cup |
1G-2U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA |
-
Paint viscosity should be 15seconds for high solid 1k base using Meiji model V-1 viscosity cup.
-
Numbers in parentheses are for two-component urethane paint with paint viscosity of 12 seconds using Meiji model V-1 cup.
-
Fluid adjusting valve opening position : Open 4 turns (counter clockwise).
-
Air and paint inlet :G1/4.
|