Features
Use of 3D air
Exceptional atomization at a very low air cap internal pressure of 0.07MPa(10PSI).
3D air, whose air flow direction is diagonal, realizes more stable spraying pattern.
Higher transfer efficiency, low spattering, and environment-friendly while lowering costs.
Lower air pressure design realizes saving by about 30% in the air consumption
and improving by about 10% of transfer efficiency.
Furthermore, less spattering paint brings less paint volume and improvement of working environment.
Remote control compatible
Spraying pattern can be adjusted by remote control.
Tube fixtures
Commercially available fixtures are used for the air and paint connection ports for easier use.
Specifications
|
▼A110L Series |
|
Model No. |
A110L-P06LP |
A110L-P08LP |
A110L-P10LP |
A110L-P13LP |
|
Nozzle type |
F110L |
|
Paint feed system |
Pressure |
|
Nozzle bore |
mm
(in)
|
0.6
(0.023)
|
0.8
(0.031)
|
1.0
(0.039)
|
1.3
(0.051)
|
|
Spraying Pressure |
MPa
(PSI)
|
0.18
(26)
|
|
Air pressure insid cap |
MPa
(PSI)
|
0.07
(10)
|
|
Spraying distance |
mm
(in)
|
200
(7.874)
|
|
Air consumption |
L/min
(cfm)
|
345
(12.2)
|
|
Paint spraying volume |
mL/min |
85 |
165 |
225 |
320 |
|
Maximum effective pattern width |
mm
(in)
|
190
(7.480)
|
230
(9.055)
|
250
(9.843)
|
270
(10.630)
|
|
Weight |
g
(lbs)
[oz]
|
206
(0.45)
[7.3]
|
● Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup.
● Feed pressure should be 0.08MPa(12PSI).
● Circulation type is available. |