Features

Adoption of new type of nozzle and cap

With taper structure of the nozzle tip, AJ-P enables high atomization and low spattering,

with a small spraying volume, resulting in maintenance and improvement of economical effect,

environmental conservation and continuous painting performance.

Remote operation

Atomization air and pattern air are supplied via separate circuits.

This structure enables remote operation of individual circuits.

Light-weight and compact

Even when the joint box (including the joint) is attached,the body is light-weight and compact.

This structure enables transportable load reduction, quick operations,

flexible access and short-distance spraying, and results in an enlarged teaching range.

Maintenance efficiency improvement and attaching/detaching time reduction

The gun body and the joint box can be attached and detached with a single bolt,

and the joint and hose not need to removed from the gun body, thus enabling easy positioning

when the joint box is re-mounted after maintenance.

No special tools are required for all maintenance step work.

AJ-P08F

JOINT BOX TYPE AUTOMATIC SPRAY GUN 

HIGH TRANSFER EFFICIENCY FOR FLAT SURFACE FINISH

We add new air cap F (for flat surface finish at high transfer efficiency)

on our joint type automatic spray gun line-up.

In use of conventional pressure feed automatic spray gun at low spraying volume,

over spraying and irregular surface have been problems to be solved.

Air cap, F-type is newly designed to lessen these problems with innovative technology especially 

for use at low spraying pressure.

It, at the same time, maintains high performance in atomization, transfer efficiency and flat surface finish.

These features are suitable for smaller workpiece and spindle spray coating.

Air horn hole releases pattern air at the position closer to paint outlet and atomizing air hole with low angle

in order to reduce paint adhesion on the surface of air cap.

Specifications