Hotline 24/7: 0986951455
Việt Nam English
Sản phầm nổi bật

Súng Phun Tự Động Meiji - AD/FAD Series

Mã sản phẩm: AD/FAD Series
Tình trạng: Mới 100%

Súng Phun Tự Động Meiji - AD/FAD Series

Liên hệ
Liên hệ

Features

Short distance painting

With taper structure of the nozzle tip, AD-P and FAD are applicable to short-distance

painting, which enable high atomization and low spattering performance with a small

paint spraying volume and small air consumption, and provide high-quality coating film.

 

Remote operation

Atomization air and pattern air are supplied via separate circuits.

This structure enables remote operation of individual circuits.

 

Maintenance efficiency improvement

The spray gun is divided into three sections: cap base, gun body and cylinder body.

This structure simplifies parts replacement, and enables the body (paint circuit) to

be washed after immersed in solvent, resulting in maintenance efficiency improvement.

Disassembling work is easy, without necessity of a special tool.

 

Change to SUS circuit for liquid contact area

A SUS circuit can be used for the liquid contact area by changing the body.

 

Compatibility

Since the cap base and the body are applicable to both AD-P and FAD,

AD can be changed to FAD by replacing a set of the cylinder body.

 

Built-in atomization air valve with remarkably lighter weight and smaller body(FAD-P)

The operation circuit has been simplified, resulting in higher operability.

FAD-P provides 40% lighter weight and 24% smaller size than our conventional model

(FA), and provides an enlarged teaching range.

 

Compatibility with circulation type

When the plug and plug packing are removed from the aperture of the circulation circuit,

these models can serve as the circulation type.

 

Specifications

Model No. AD-P10
<FAD-P10>
AD-P10-SU
<FAD-P10-SU>
AD-P13ST
<FAD-P13ST>
AD-P13ST-SU
<FAD-P13ST-SU>
Nozzle type F110
Nozzle Bore

mm

(in)

1.0

(0.039)

1.3

(0.051)

Atomizing air Pressure

MPa

(PSI)

0.25

(36)

Pattern air pressure

MPa

(PSI)

0.25

(36)

Spraying distance

mm

(in)

200

(7.874)

Fluid feed pressure

MPa

(PSI)

0.03

(4)

0.04

(6)

Air consumption

L/min

(cfm)

110

(3.9)

215

(7.6)

Paint spraying volume mL/min 100 180
Maximum effective pattern width

mm

(in)

145

(5.709)

180

(7.087)

Weight

g

(lbs)

[oz]

180<220>

(0.40<0.49>)

[6.3<7.8>]

255<295>

(0.56<0.49>)

[9.0<7.8>]

180<220>

(0.40<0.49>)

[6.3<7.8>]

255<295>

(0.56<0.65>)

[9.0<10.4>]

  • Paint viscosity should be 20 secounds for lacquer enamel using a Meiji model v-1 viscosity cup.
  • FAD type is built-in air valve for atomizing air.

Bình luận facebook
Bình luận Form
go top