・Provides a flat application pattern with an even layer of particles.
・Provides a wide pattern even at a low flow rate.
・Delivers higher atomization performance by lowering the inlet pressure of the spray gun.
・Offers higher coating efficiency in short distant spraying (150 mm or so).
Special spray gun for photocatalyst solution
Creating super hydrophilic film for anti-fogging, antifouling protection, antibacterial protection, water cleaning, gas decomposition, etc.
|
Model |
Applications |
Features |
Nozzle orifice bore
[φmm] |
Atomizing air pressure
[Mpa] |
Performance |
|
High atomization |
General-purpose atomization |
|
Spray distance
[mm] |
Pattern width
[mm] |
Fluid output
[mℓ /min] |
|
LPH-50-S5 |
For interior coating |
|
○ |
With one-touch adjusting knob |
0.4 |
0.2 |
400 |
150 |
20 |
|
(Fluid output: 0 to 20mℓ ・min) |
|
LPH-50-S9-04 |
|
○ |
0.4 |
|
|
0 to 15 |
|
LPH-50-S9-06 |
|
○ |
0.6 |
|
|
0 to 22 |
|
LPH-50-S9-10 |
|
○ |
1.0 |
|
|
0 to 35 |
|
LPH-101-124LVG |
For exterior or industrial coating |
— |
○ |
|
1.2 |
200 |
150 |
40 |
|
LPH-101-S18 |
○ |
|
|
1.0 |
150 |
200 |
40 |
|
LPH-101-S19 |
○ |
|
LPH-101-S18 with one-touch adjusting knob |
1.0 |
150 |
200 |
40 |
|
(Fluid output: 0 to 80mℓ ・min) |
|
LPH-101-S23 |
For specific coating material manufacturer |
◎
High atomization |
|
With one-touch adjusting knob |
0.5 |
150 |
200 |
40 |
|
LPH-101-S27 |
|
○ |
0.8 |
150 |
200 |
40 |
|
LPH-400-S1 |
|
○ |
Short-distance large spray pattern |
1.2 |
0.15 |
150 |
300 |
45 |
|
LPH-101-S34 |
○ |
|
Jam nut locking type with one-touch adjusting knob |
1.0 |
0.2 |
Fine flow control can be exerted.
(comparison with LPH-101-S19)
(Fluid output: 0 to 50mℓ /min) |
* The fluid cups are sold separately.
* As a gravity fluid cup, one made of stainless steel is recommended.
* General paint cannot be used for LPH-101-S18, LPH-101-S19, LPH-101-S23, LPH-101-27 or LPH-101-34.
* Before using these spray guns, make sure you understand the properties of the photocatalyst and hydrophilic solution.