Súng Phun Anest-Iwata TOF-50-062P/TOF-101-072P

Sản phầm nổi bật

Ebara

Atago

Tin tức mới nhất

Mã sản phẩm: TOF-50-062P/TOF-101-072P

Tình trạng:

Súng phun Anest-Iwata TOF-50-062P/TOF-101-072P

Liên hệ

Both the air and liquid joints are located at the bottom of the grip, which makes the gun very easy to handle.
Its compact size and light weight allow the worker to work for a long time without fatigue.
The body is made of forged aluminum and alumited, making it resistant to corrosion.
The trigger and many other peripheral parts are made of stainless steel for rust prevention.
Vaseline is used as grease for all the sliding parts on the air path.
The body has pearskin finish for the slippery release agent.
The fluid and pattern adjusting knobs have a locking mechanism to prevent the worker from making operation mistakes.
The gun hook can be fixed at the top or on the side of the gun and hung on the worker's belt or other place.
The gun hook (with 2 washer-embedded screws) is optional (parts code No. 93018920).

Model	Nozzle orifice bore [φmm]	Applied air cap	Atomizing air pressure [MPa]	Air consumption [ℓ /min]	Fluid output [mℓ /min]	Pattern width [mm]	Mass [ g ]
TOF-50-062P	0.6	E2 (LPH-50)	0.1	50	180	150	227

<Connection> Air:φ6×4mm tube
Fluid:φ6×4mm tube

Spray Gun for Release Agent

TOF-101 is a spray gun capable of applying release agent over a wide area efficiently with a large tulip pattern. It provides a wider pattern width than the compact spray gun for release agent (TOF-50-062P).